Results 1 to 3 of 3
  1. #1
    RC Racer
    Join Date
    Sep 2011
    Location
    langhorne, pa
    Posts
    156

    my e slayer build

    well after getting a summit the slayer just sat. so i wanted to make into a e slayer. im kinda burned out of the nitro! i alwas had nitro cars and trucks. i wanna do something new!! i still need a motor ans esc but its a start! Only have one question. does anyone now a good gearing set up???



  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,794
    Quite a few have done the Slayer _-> E-Slayer conversion along with some doing the Revo --> E-Revo conversion. Check out or ask in the E-Revo forum as you would get a lot better response there.
    The Super Derecho

  3. #3
    RC Qualifier
    Join Date
    Apr 2009
    Posts
    583
    I always ran low gearing w/ high kv motors on 2s for racing. It sort of depends on what you are doing with it. But a 40t spur gives you a lot of options then get your pinion based on what motor/battery combo you run. Just note that lighter is better w/ this high CG truck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •