Whats needed?
Whats needed?
arms
axles
rods
body mounts
body
rockers
tires
gearing
bumpers
Whatever it is I just said... I could be wrong.
how much is the ideal cost
The first expense is your time...
Start researching for part numbers.
Then search eBay and your preferred hobby shop for deals.
Last edited by Jimmie Neutron; 10-08-2011 at 06:13 PM.
Whatever it is I just said... I could be wrong.
okay so it has every thing the revo has except bumpers body posts and bodys and tires are different right
No.
Everything on the first list is what is different.
Whatever it is I just said... I could be wrong.
well the revo has long a arms rods and such so is there longer a arms then the revo has
EMBE build in progress!
Revo/Summit arms & rods are as wide/long as they get.
With arms, don't get confused between wheebase (length) and track (width).
The Summit has a longer wheelbase;
but most Summit owners have switched to MERV rear arms to eliminate the axle shaft angle issues.
Whatever it is I just said... I could be wrong.
oh ok so if youwanted to you could just put summit tires on the revo
EMBE build in progress!
Yes, but you would thermal.
Summit gearing is required as well.
Whatever it is I just said... I could be wrong.
okay so i pretty much can buy revo parts
EMBE build in progress!
Revo:
arms
axles
rods
Summit:
body
bumpers
body mounts
tires
gearing
Either/or:
rockers
Whatever it is I just said... I could be wrong.
okay thanks man sorry for me being stupid but one last question should i buy rpm stuff or just the stock stuff
EMBE build in progress!
I would get RPM arms for sure... not that much more $$.
Whatever it is I just said... I could be wrong.
can i slap on sum summit tires on a completely stock revo vxl
EMBE build in progress!
Yes, but you would thermal.
Summit gearing is required as well.
Whatever it is I just said... I could be wrong.
thermal??????
EMBE build in progress!
ESC would over heat and shut down.
This is a built in safety feature.
Ignoring this feature will lead to total ESC melt down.
Whatever it is I just said... I could be wrong.
ok well its snowing so i dont think heat will be a problem will it
EMBE build in progress!
It may take longer to thermal in colder temperatures, but you will still thermal.
Whatever it is I just said... I could be wrong.
ok so fan should work rigtht?
EMBE build in progress!
Fans are like putting on a band-aid.
The correct gearing is the same spur as what you have, just need a lower $4 pinion.
Last edited by cooleocool; 10-13-2011 at 07:25 PM. Reason: Removed graphic image.
Whatever it is I just said... I could be wrong.
ok well i have a 21t pinion and a 55t spur
EMBE build in progress!
Watch your temps... have fun!
Whatever it is I just said... I could be wrong.
Thanks man. I ordered summit tires and bumpers rpm arms and proline ford f150 raptor body. hopefully it turns out good!
EMBE build in progress!