Results 1 to 7 of 7
  1. #1
    RC Competitor
    Join Date
    Aug 2011
    Posts
    60

    question bout the e revo

    hello,
    does the brush e revo conversion is it easy to install nd where can i find it online thnxsss
    whats better the mmm 2250 or the tekin rx8 2250 im leaning more to the tekin'
    any more help would be apperciated

  2. #2
    RC Qualifier
    Join Date
    Oct 2011
    Location
    DC650, CA
    Posts
    348
    Try backlogging this forum, or google is my best bet when I needed info help

  3. #3
    RC Competitor
    Join Date
    Aug 2011
    Posts
    60
    k but i tried to find the conversion but counldnt find it:/

  4. #4
    RC Turnbuckle Jr.
    Join Date
    Jul 2010
    Location
    England
    Posts
    5,791
    There isn't a conversion kit, you have to buy the motor and esc ( either together or separately- MambaMonster & 2200kv motor, or the RX8 & whichevee tekin t8 truggy motor ) and install it like you would any other esc and motor ( just a few screws basically ) with a suitable pinion gear.

    Read this thread:

    http://traxxas.com/forums/showthread...-max-questions

    Exactly the same principles. More reading material for the BL newb:

    Erevo 101:
    EREVO FAQ

    Lipo, LVC, Brushless & Battery charger/charging guides & purchasing links:
    TUTORIALS

    Refer to this to find parts, upgrades, batts & chargers etc:
    USEFUL LINKS

    I can assure you though, there are hundreds and hundreds of threads where people ask 'what am bestest BL system?'- you just have to spend some time reading down through the erevo & BL erevo sub-forums- there are pros and cons for the castle and tekin systems, depends what your specific goals are, and maybe your budget too- the erevo faq should help.
    Keeping the Mods busy is my specialty...

  5. #5
    RC Champion
    Join Date
    Oct 2009
    Posts
    1,330
    As AOD says.. the change from Brushed to Brushless is pretty simple...

    The ESC and Motor from the Brushed Erevo is simply replaced with whatever ESC/Motor combo you choose and the wire from the ESC plugs (ofcourse) to the receiver. And then you probably want a new pinion/spur gear to go a long with the BL motor power...
    For example 19/54 - 21/54 (just examples) depending how fast you wanna go and the voltage you apply
    And then feed the BL motor with Lipo batteries...

    IMO (but that might just be me) If you RX/TX is 27 mhz I would consider upgrading to 2.4 Ghz radio system .
    The feeling/risk of loosing control over the truck is not a nice thought at all. Especially with a Brushless system...
    Slightly Addicted

  6. #6
    RC Competitor
    Join Date
    Aug 2011
    Posts
    60
    thnxsss guys nd i already knew bout lipos nd etc...
    thnxss for telling me bout the e revo

  7. #7
    RC Qualifier
    Join Date
    Oct 2011
    Location
    DC650, CA
    Posts
    348
    good luck!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •