Results 1 to 6 of 6
  1. #1
    RC poster
    Join Date
    Jun 2011
    Posts
    13

    Put in New servo and steering is reversed

    As the title says I got a new Hi-Tech Servo. I installed it and for some reason when I turn the wheel on the controller to make it steer right and its steers left.

    I have made sure that the servo is installed properly.
    Any help would be great!!
    Thanks

  2. #2
    RC poster
    Join Date
    Sep 2011
    Posts
    8
    i just ran into the same problem. all you have to do is hit the switch on the bottom of your transmitter for reverse steering and all should be good

  3. #3
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,769
    With the AM radio, it is that simple. With the 2.4, you'll have to go through the menu to switch. That menu is in your manual.
    The Super Derecho

  4. #4
    RC Qualifier
    Join Date
    Jul 2009
    Location
    Central Cali
    Posts
    259
    Yeah what is the deal with that??? I have run into the same problems with certin servos when I change them out???

    What causes this G?

    Matt
    This is getting expensive!!!!!!

  5. #5
    RC Racer
    Join Date
    Sep 2011
    Location
    georgia
    Posts
    164
    Depending on the manufacturer of your servo the wiring for the receiver could be opposite of the traxxas but as the other guys said its an easy fix

  6. #6
    RC poster
    Join Date
    Jun 2011
    Posts
    13
    yes Chadillac you are right. Depending on manufacturer, ther servos will come pre reversed for planes and boats. so therefore you must adjsut this setting through your controller. I had to call the maufacturer for this.

    thanks everyone for your help it is greatly appreciated.
    Troy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •