Results 1 to 40 of 338

Threaded View

  1. #1
    RC Qualifier
    Join Date
    May 2011
    Ft Bragg N.C.
    Ok.....The stock motor plate will not work on this Dewalt 14.4 . To start off I did grind a little on the trans and the motor did fit in the mount but the screw holes that you mount the motor to the plate are so far apart. It looks like I wouldn't have no adjustment at all. A friend of mine let me use his single 775 mount to get a ideal of what needs to be done but looks like it has the same issue. Can someone help and when I get off ill post pictures so y'all can see what im talking about with part# from the motor. I've seen alot of peoples use the stock plate but don't understand how it worked. Thanks!!!

    The part# on my motor is 396506-11
    Last edited by cooleocool; 08-17-2011 at 11:04 AM. Reason: merge

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts