My Cvds keep popping out

[150vince]

I changed my Cvds and the pop out when my suspension gets full raised but the pop back in most of the time how can I stop this. Its a erbl with traxxas steel Cvds

[mamba max1]

If your using RPM suspension arms, that's your problem. They flex too much.

Also, if could be that you have your push rods mounted in the innermost hole. You can't do that with CVD's.

[ArmyofDarkness]

You need the deeper drive cups designed for the extended wheelbase suspension- part 5153r:

http://traxxas.com/pitpass/howto/new...lbase-Suspensi

Magic

[savge4404]

what hole on the suspension arm can you use?

[ArmyofDarkness]

Ones further out so that the suspension isnt jacked up so high- raised suspension means the cvds are pulled further out from the drive cup, level suspension means they are pushed further in- I would get the longer drive cups, will solve your problem for certain ( assuming the cvds dont start binding due to the extreme angle that is ).

[savge4404]

k i keeped poping out one of the rear cvds and i completely forgot about the holes, its been 2 years since i last had the e-revo running, just yesterday i bought a mmm and 3s lipos and a charger, holy **** is this thing fast!!

[ArmyofDarkness]

Holy monkeys indeed....

( Any word which gets starred out is banned, edit your post before the mods eat your soul/ moderate your post ).

[savge4404]

that was me this is my second account

sorry for thread jacking btw

[knight81]

NO worries.

Are your TRAXXAS steel CVD's bent a little bit? If mine get bent a little bit - particularly in the rear - they tend to pop out easily. I changed to Robinson Racing steel axles (82300) - I can use RPM arms and adjust push rods however I like and no more popping out.

[savge4404]

i havent noticed if they were.

[mwi]

I run CVDs and true track rear a arms and a arms in the front too and have extended drivecups and pushrods in inner holes...

no issues here in bashing and making it through terrain and small jumps that come along the way,,,

but yes the angel looks a little like " Im gonna pop out and might bind " but it has not happened to me at all

[revomikey]

Just hit this problem too. My tru tracks don't like the cvds. No worries though, just ordered the extended cups.