Thomas P´s Stampede 4x4 x 4s Lipo

[muck]

HMM I thought those diff cases where sealed well... how do you think it got in?

on your motor, WOW

[Thomas P]

Beach sand, like dust /:

Motor, was used when i got it...but my finger aint saaaweet against the motors

[Thomas P]

My little brother bought a Pede 4x4 for a month ago (used)..shrouded with goodis, but the lid was real bad painted..no stickers at all...but i got it sorted out, what ya think?

Left is mine, right is he's

[spenniepoos]

Your bros pede looks sick dude what esc and motor is he running thomas???...peace

[Thomas P]

Thanks mate, he is running same setup as me now, MMP SCT Pro (2400 motor), but on 3s Lipo, im on 4 =)..

[spenniepoos]

Good stuff dude. I have made up my mind i am going to get hobbywing sc8 esc and tenshock 3400kv motor from funshobby and run 2s and 3s.......peace

[Thomas P]

Sounds good mate, think ya will be pleased

[muck]

Thomas, what does your pede weigh with the lipo in it?

[Thomas P]

Ohh, i have no idea mate, but it is no fether ..see if i can look that up

Got me some new tires, testing tomorrow

[Thomas P]

New film with both Pedes...The 1/10th are in the end of the movie =)

[Thomas P]

Well, the Stampede 4x4 worked superbish with the 1/8 Slingshots from Proline



...got app 8min of film with the GoProHERO2 today with the BEAST..all filmed from NOT the ground,but this



stay tune..

[tfleig17]

How in the world were you not rounding out the hex on the inside of your wheels? I just put a 2400kv castle in mine and have ruuined 3 sets of wheels already

[Thomas P]

Not sure why, maybe cuz i use the Revo slipper and got a tiny slip..still WOD

Movie, just loooove this truck

http://www.youtube.com/watch?v=dCsHG...e_gdata_player

[tjtoed]

Wow. That gravel pit is awesome. What I wouldn't do to have a place like that around me.

Nice setup, truck and helmet cam.

[Thomas P]

Thanks mate, new lid, wheels and slingshots are ordered ..pimpit

[spenniepoos]

Hi thomas i am going to get the caster shocks what oil and pistons do you use in your setup mate? plus do you think my new tenshock 4 pole 550 3500kv motor and hobbywing sct pro esc with be much of an improvement over my vxl system? i know some of my batterys need to be upgraded to 40c+. thank you for your help dude...peace

[Thomas P]

I think i use the 1.3 pistons on all 4 corners, not sure about weight..think i was around 30-40 front and 40 rear might be 45, even 50 and hard speing, NOTE harder speing in the rear and only front shocks ln all 4 corners.

With that 4pole 4700 system and 3s or 2 s iam sure it will be a rocket mate

[o0wiz0o]

Quiff cam rocks! Sure you could get that truck on the roof of that red building. ;-)

[spenniepoos]

I think i use the 1.3 pistons on all 4 corners, not sure about weight..think i was around 30-40 front and 40 rear might be 45, even 50 and hard speing, NOTE harder speing in the rear and only front shocks ln all 4 corners.

With that 4pole 4700 system and 3s or 2 s iam sure it will be a rocket mate

thanks dude i will get two sets of fronts maybe put 45-50 all round and i went 3500kv 4 pole for more punch

[Thomas P]

Quiff cam rocks! Sure you could get that truck on the roof of that red building. ;-)

Plan is to jump the huge gap or "bay" look gap, where i do the huge drop with the 1/10 Stampede

Painti g some Baja bug lid, got new rims and Knuckles from Prolines...Badlands xtr ordered

[muck]

great vid. Would love to have a bash area like that.
A question, since most of this truck is 1/8th scale with your mods, why not a buggy or truggy?

[atclauss]

Thomas What do you use for body repair

[Thomas P]

Muck, i just love the size of it ..used to run a maxxed out FLM maxx, fun but not near this

Atclauss, glassfibertape, or 3M chassi protection

[Thomas P]

Kind of pleased now

Proline Ford F-250
Proline Velocity v2
Proline Knuckles Medium

[muck]

Very Nice!

[Thomas P]

Thanks mate

[spenniepoos]

Once again that is one sick paint and wheel combo dudeI have just put my new motor and esc in my pede and i am going to give it a bashing tomorrow and next month order those caster shocks and then my pede is sorted.thanks for your help with the shocks man..peace

[Thomas P]

Thanks mate ...raining heavy ...

[Thomas P]

Painted my brothers new Pede 4x4 lid..

[spenniepoos]

Looks sick dude like the green body and black wheels man

[Thomas P]

IL let him know mate, il let him know =)
Cars worked ace today..

[spenniepoos]

Same here dude turned the punch to 9 max on the esc and ran the whole pack with a 17t pinion and 2s 5300mah 50-100c and it must be doing 42mph+ love it and cant wait to try a 3sps your paint and wheel combo on your and brother pede are sick man.....peace

[Thomas P]

Glad mate that you are pleased with your car ..i broke a Hex-pin only thing


Footage from last session, just still pics..

[multidookey]

dude awesome build i just read the entire thing. i was wondering what wing mount that was and what wing? thinking of doing something like what yours looks like. and so wait do have two different pede's? and then your bro's also? cause i see so many different ones XD

[Thomas P]

Wingmount was a Hobytech 1/8 buggy mount. Think a regular "rear" mount can work.

The chevy lid car is the smaller Traxxas Stampede 1/12 that i have done

The Yellow above is mine, the green is my brothers car, he started to run some rc just now =)

Thanks for all replys guys, makes me want to go further =)

[spenniepoos]

You keep pushing the boundaries dude we love all what you are doing bash hard thomas....peace

[Thomas P]

Thats my goal, bash hard or die young ...bad weather here ...

[Thomas P]

4 m high jump off that 2m BMX Dirtramp...result after a superb landning

[Thomas P]

New film,

[Rastus]

As Always Thomas, great work. Inspiration for us all!!!