Results 1 to 7 of 7
  1. #1
    RC Qualifier
    Join Date
    May 2010
    Posts
    263

    Brushless Motor Help

    I have the Velineon brushless system and have been using the stock 8.4 volt 3000mah bateries the truck came with. the truck is fast and has alot of torc. I Broke the whole axel on the left side of the truck because the motor is heating up so hot it melts the plastic. Is the velineon brushless a 540 size motor? http://www.integy.com/st_prod.html?p...32&p_catid=109
    would that fit onto it? also for metal axels would these work? http://www.integy.com/st_prod.html?p...79&p_catid=258 please post a response! thanks for all the help!!!
    Slash rocks!!!

  2. #2
    RC Qualifier
    Join Date
    Feb 2011
    Location
    Chicago - South Loop
    Posts
    252
    Im not sure about which motor fits (still new to slash). But a lot of folks use MIP's for upgraded axles. I use them and so far so good. No complaints
    Backslash Or Bust!

  3. #3
    RC Champion
    Join Date
    Oct 2009
    Location
    Germany
    Posts
    1,552
    If you have melting plastic from motor heat, something is very wrong, and a fan will not do anything to help that. You're actually damaging the motor magnets at those temps. Check for binding and gear down.

  4. #4
    RC Champion
    Join Date
    Sep 2010
    Location
    the giant boot. Anybody?
    Posts
    2,727
    Integy cvd's are trash. I run 4s on the MMP SCT 2400 setup with stock driveshaft's, proper slipper adjustment and not break's yet. Knock's on wood.
    *Proud Husband of United state's Air Force wife.*

  5. #5
    RC Racer
    Join Date
    Mar 2011
    Location
    NJ
    Posts
    158
    Quote Originally Posted by I EAT DIRT View Post
    Integy cvd's are trash. I run 4s on the MMP SCT 2400 setup with stock driveshaft's, proper slipper adjustment and not break's yet. Knock's on wood.
    Dirt, do you have a 4x4 slash? I read on Tower that system is not compatible with Slash 2wd or any 2wd? Is that true?
    If so, what brushless set-up would you suggest? Can i run brushed motors on MMP ESC's? I would like to be able to run my stock TITAN, maybe in stock races.
    THX

  6. #6
    RC Qualifier
    Join Date
    May 2010
    Posts
    263
    can anyone give me a link to those axels? What is a good gear ratio for speed and torc?
    Slash rocks!!!

  7. #7
    RC Qualifier
    Join Date
    Feb 2011
    Location
    Chicago - South Loop
    Posts
    252
    Quote Originally Posted by boston2612 View Post
    can anyone give me a link to those axels? What is a good gear ratio for speed and torc?
    Do a search for 'MIP CVD SLASH'. Online stores and most shops have them. They run about $30.
    I cant insert links from my phone...
    Backslash Or Bust!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •