Results 1 to 7 of 7
  1. #1
    RC Competitor
    Join Date
    Sep 2012
    Location
    mighty old england
    Posts
    78

    Steel foc for revo.

    Hello ive just received the last 2 gears to have a full*rrp steel foc but since I brought them individually im thinking im missing parts. The full foc all in one price shows a metal collar or something which I haven't received.

    Will that be inside my standard foc box already I can just reuse of will I have to order it and if so where from.

    To grease them after install ive been reccomended black graphite grease which has a push bike chain and gears picture I hope it will be ok for rc. I know the specific rc liquids are usually a rewrap of motor liquids thobso hopfully it was a good buy since I couldnt find any rc branded black grease here.

  2. #2
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,473
    the aluminum collar should come with the RRP kit.
    | Rally GT8 Powered By CC | BackSl4sh Roadrunner |

  3. #3
    RC Qualifier
    Join Date
    Feb 2012
    Location
    SD California
    Posts
    905
    Lubing the trans with liquid graphite won't hurt anything. It goes on as a liquid and drys into a powder. It also won't attract dirt like normal grease/oil.

  4. #4
    RC Competitor
    Join Date
    Sep 2012
    Location
    mighty old england
    Posts
    78
    What a trip yes I think I do have it actually its just smaller than I expected in with the 2 foc gears theres a small collar but I was looking for a bigger diameter.

    Alls well then I can tear it down tonight.

    Any help on setting the shift point ir even better a guide on doing it. Or factory setting if there is one

    I went with the wide ratio set so may need to stretch the change too mayb.

    Thanks for posting
    Last edited by RC-PHASE; 11-25-2013 at 10:59 AM.

  5. #5
    RC Competitor
    Join Date
    Sep 2012
    Location
    mighty old england
    Posts
    78
    No its the alloy spacer I have is that it?

    Edit.

    Ive just looked again and yeah I do have it thats ace I also got alot of shims.

    Is there any guides on here installing the steel foc I can follow along with so I dont mess it up.
    Last edited by RC-PHASE; 11-25-2013 at 11:28 AM.

  6. #6
    RC Turnbuckle Jr. humayrayakongkinaon's Avatar
    Join Date
    May 2011
    Location
    Long Beach, California
    Posts
    6,473
    if you don't have this shaft, you wont be able to install your FOC gear
    http://www.ebay.com/itm/Traxxas-5369...item58a323eab4

    this is my Wide ratio gear also that I don't have anymore.
    | Rally GT8 Powered By CC | BackSl4sh Roadrunner |

  7. #7
    RC Competitor
    Join Date
    Sep 2012
    Location
    mighty old england
    Posts
    78
    Thanks I do have s shaft from when I removed reverse is that the one I need to put back in? The gearbox has a traxxas foc in now but I kept all of the reverse stuff.

    Any good threads on this install I can follow would be great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •