Results 1 to 8 of 8
  1. #1
    RC Racer
    Join Date
    Sep 2008
    Posts
    227

    New Tx for the Summit , Airtronics M-11?

    Is the Airtronics M-11 the choice transmitter for the Summits.

    I usually use Spectrums , but it looks like the Airtronics is currently the only 4 channel pistol grip out there.

    What are you guys using ? [other than stock]

    edited to add:

    Ok there is the Futaba 4pk too.

    Are you able to use all 4 channels in both transmitters, for our inteded uses, throttle-steering -shiftlock F&R- shift high&low ?
    Last edited by AMZ; 06-22-2009 at 01:38 PM.
    Won my first race in 1985...

  2. #2
    Registered User
    Join Date
    Nov 2007
    Location
    Farley's van down by the river
    Posts
    875
    4PK for me, using all channels and have the same options as the stock radio for running the diff locks and trans shifting...

  3. #3
    RC Racer
    Join Date
    Sep 2008
    Posts
    227
    Quote Originally Posted by powerslider
    4PK for me, using all channels and have the same options as the stock radio for running the diff locks and trans shifting...
    Was there any re-wiring/servo y harneses or mixing involved?
    Won my first race in 1985...

  4. #4
    Registered User
    Join Date
    Nov 2007
    Location
    Farley's van down by the river
    Posts
    875
    I use a Y harness for the steering, no channel mixing. Ch 3 is for the trans and ch4 is for the diffs, I use a pushbutton on ch4 to lock both diffs and a dial also on ch4 to unlock only the rear if desired...

  5. #5
    RC Racer
    Join Date
    Mar 2009
    Location
    Vancouver, BC
    Posts
    184
    I think the M-11 doesn't work because there's no direct control of Ch4, it's a mix channel for alternate braking in Nitro vehicles. However, I've never used the product, this is just what I've gleaned from the manual.
    morgue

  6. #6
    RC Competitor
    Join Date
    Jan 2009
    Posts
    78
    will a 3pks work with the summitt?

  7. #7
    RC poster
    Join Date
    Mar 2011
    Posts
    1
    Quote Originally Posted by powerslider View Post
    4PK for me, using all channels and have the same options as the stock radio for running the diff locks and trans shifting...
    Hey Powerslide so how did you get both the front and rear diffs to work off one channel? The stock receiver has 5 channels and 4pk only has 4.

  8. #8
    RC Qualifier
    Join Date
    Dec 2010
    Location
    Lava Land
    Posts
    341
    Call airtronics they are very helpfull. check out the new MT-4 as well kinda slick with telemetry. anyway free call and just ask about it, Jack knows his stuff . 800-262-1178

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •