+ Reply to Thread
Results 1 to 3 of 3
  1. 01-31-2011 02:58 PM #1
    _jono_
    _jono_ is offline
    RC Qualifier
    Join Date
    Nov 2010
    Posts
    557

    hellow help quikly with soldering!~

    I got like some solder on the top of the connecter on one of the peices and a little past the line... is it fine?!
    Reply With Quote Reply With Quote
  2. 01-31-2011 03:10 PM #2
    WesselDoubleT
    WesselDoubleT is offline
    RC Qualifier
    Join Date
    Jan 2011
    Location
    TX
    Posts
    276
    It might be ok, but you might want to just heat it up and move it back just a bit. Just to be safe
    Reply With Quote Reply With Quote
  3. 01-31-2011 03:19 PM #3
    Meebert
    Meebert is offline
    RC Qualifier
    Join Date
    Dec 2010
    Location
    recalculating...
    Posts
    564
    The connector is fine if it can be assembled correctly and plugs into the other connector without problems, if the wire is securely soldered to the connector and there is no place where + touches -. If solder is in the wrong place remove it, hope this helps if not post pics if you can
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules