Twin to single

[pentec]

I am wanting to buy a Summit and I see that they are 775 twin titans but most of the pics that I have seen have only a single motor alotof them brushless. Is there a conversion of some type? Just researching before I buy and a little curious.

[couto54]

They come from traxxas with just one single 775 Titan motor but u can get a dual motor kit. A lot of the guys run Kershaw designs 700h.o. conversion which keep the 100% waterproof standard in check. The guys who run brushless usually go with the Mamba Monster from castle or the RX8 from Tekin neither of which are waterproof.. and let me tell u I love being able to bash in the mud n hose it off when I'm done. I just switched o the Mamba Monster n its awesome I waterproof my ESC n its perfect. Bottom line is anyone one on this forum will tell the summit is amazing cuz it does it all.
Hope I gave u some insight.

[OnebadTMAXX3.3]

I am wanting to buy a Summit and I see that they are 775 twin titans but most of the pics that I have seen have only a single motor alotof them brushless. Is there a conversion of some type? Just researching before I buy and a little curious.

i am currently running dual 775's. I went out an got the traxxas two motor plate (5690) and have been running them for like three months now. If you want more info pm me and i will give you all the details. thanks

[pentec]

Ok thats makes a little more sense. I must have read the specs. wrong. I could swear i read twin 775's are what it came with. Thanks for getting me straight.

[H2Ohaze]

Ok thats makes a little more sense. I must have read the specs. wrong. I could swear i read twin 775's are what it came with. Thanks for getting me straight.

Revo has twin 550's.

[TheSnakeJake]

Revo has twin 550's.

and e-maxx...

[couto54]

No problem that's what the forum is 4

[pentec]

one mmore question. Iwill be getting a Summit soon what else shoould I get with it? I have some good NIMH batts. already and good charger. I was looking for RPM arms or something of the sort but i couldnt find any. Is there snything that I should be looking to grab at the same time?

[xwaz]

ya I have the mini and did you hear that the brushed has the 1 10 slash motor in it.

[MJP]

one mmore question. Iwill be getting a Summit soon what else shoould I get with it? I have some good NIMH batts. already and good charger. I was looking for RPM arms or something of the sort but i couldnt find any. Is there snything that I should be looking to grab at the same time?

Got my Summit for a month now, read a million lines (incl the very good FAQ in this forum) and drove about 10hours of snow and mud.

1) If you switch to LiPo you will never want to switch back. I drive stock ESC/Motor with Lipo and a Lipo warner. Impressive compared to NiMh.
2) Then I got a glove/shell/cover to cover the base when driving in the mud
3) Don't replace Plastics with Alu cause Alu will break while plastic will bend
4) Can't switch to MMM or Tekin T8 cause they are $300-$400 to switch

[OnebadTMAXX3.3]

[QUOTE=mjp;4691292]Got my Summit for a month now, read a million lines (incl the very good FAQ in this forum) and drove about 10hours of snow and mud.

1) If you switch to LiPo you will never want to switch back. I drive stock ESC/Motor with Lipo and a Lipo warner. Impressive compared to NiMh.
2) Then I got a glove/shell/cover to cover the base when driving in the mud
3) Don't replace Plastics with Alu cause Alu will break while plastic will bend
4) Can't switch to MMM or Tekin T8 cause they are $300-$400 to switch[/QUOTE]

i got a brushless system for 180.00 shipped.

[couto54]

Like these guys said, lipos are good but if you're happy other batteries in you want to use those it's no big deal. I use the duratrax onyx to 240 charger it charges 2 batteries at once it's really nice with the digital display I like it a lot. as for the arms I'll just leave the factory ones until u break em and then go to the rpm's