Do I need to set anything on the ESC when using Lipo?

[Beej]

I have used lipo since the day I got the truck but am wondering if I need to set the LVC on the ESC or if it is pre programmed already?

[CAB]

It is NOT set from the factory... Page 17 of the manual.

Factory setting is not LiPo mode with low voltage detection. To set it:
1: make sure the led on the ESC is on and red.
2: Press and hold the ez-set button for 10 seconds. The Led will turn off and then light green. Also a "rising" musical tone will be emitted from the motor.
3: Low-voltage detection is now activated.

[RC-Fan]

lipo mode = green led on the esc, stock setting is nimh = red led.