On the Seaking 180 I have it has 5.5 bullet batt leads. My question is, I would like to retain my factory traxxas connectors for now or at least until my stock boat esc give up. Kintec has a 5.5 to traxxas adapter. If I purchase two and put them together will that give me the y connection I need to run everything?
Never mind I see what I need. Thanks
Last edited by cooleocool; 06-08-2013 at 08:00 PM.
You can do that, but I would suggest removing the bullets and replacing with traxxas connectors if that is what you want to run.
Every additional connector increases resistance, and has the potential to become "bad connection".
It is also good practice to keep wiring runs as short as reasonably possible.