Red and green flashing esc

[BrabusBen]

Just before I send two escs doing the red/green flashing (manual says high voltage shut off but I only ever run balanced 2s lipos in parallel and 2xStocks in parallel and it won't stop flashing at all no mater what packs I use!) it's not the servo, or the motor but has anyone ever stopped this flashing without sending it back to the big T?

[Mr.Nitro]

Mine did it before when i ran gearing that was too high. It makes no sense, but when i changed it back, the problem went away.

[BrabusBen]

not even connected to the truck at the moment and still does it :0(

[Manne]

Try to unplug one of the motor wires, then start it . There is a few threads somwere where I explain my problem and how I solved it.

[BrabusBen]

Think I've tried that but I'll give it another go ;0)

[BrabusBen]

Nope, still doing it - looks like its a return ;0(