Wheelie bar?

[danielhr77]

Hello Guys,

I think the answer is no, but will the wheelie bar from the E-Revo fit in the Summit?

If not, are there any plans to release one?

Thanks!

Daniel.

[RC-Fan]

the original traxxas Doesn't fit it has to be the wheelie skid bar, and it is available from different manufactures.

[dahkyne]

Hello Guys,

I think the answer is no, but will the wheelie bar from the E-Revo fit in the Summit?

If not, are there any plans to release one?

Thanks!

Daniel.

p/n 7184 works fine. just put one on my 1/16 summit yesterday.

[rich8560]

Hello Guys,

I think the answer is no, but will the wheelie bar from the E-Revo fit in the Summit?

If not, are there any plans to release one?

Thanks!

Daniel.

why put a wheely bar on off road it sounds like the truck is busted on road it's fine but after a few crashes i removed it and the truck worked alot better

[evanhuntrc]

It works. I have it on mine. Keeps from those pesky back flips when I get a little throttle heavy

[RC-Fan]

It works. I have it on mine. Keeps from those pesky back flips when I get a little throttle heavy

Are you running 3s? I though that wheelie bar was attached to the wing mount?

[danielhr77]

Thanks guys! Were you able to leave the rear bumper installed too? Any pictures will be appreciated...

[evanhuntrc]

Are you running 3s? I though that wheelie bar was attached to the wing mount?

I am running SPC 2S batteries. With stock gearing and stock tranny, mine was a wheelie machine! From a dead stop, rolling to full throttle, etc. Even in grass and semi loose gravel. Grant it, I'm a little heavy on the throttle After the tranny flip, it would wheelie from a dead stop, but that was about it (which I wanted for more trail/climbing stuff)

Thanks guys! Were you able to leave the rear bumper installed too? Any pictures will be appreciated...

I took the stock rear bumber (not the bumper mount) off and put the wheelie bar on. Once I get feeling a little better (pesky head cold) I'll try and post a pic or two of what I did.

[evanhuntrc]

Here are a couple pics...

[RC-Fan]

Evanhuntrc how do you like the rpm arms in the rear, how do they perform compared with the stock ones?

[evanhuntrc]

They are 5mm shorter than stock (the were for the MERV) so you're going to lose some width. This will also effect handling, etc. I don't drive this like a MERV, so high speed stability isn't as big of a deal to me as it may be to you.

Other than that, they've been great so far. CRAZY durable. I broke 2 stock arms in a week. These have been bulletproof (thus far). I also have the RPM carriers. They've also been great.

[c0nr4d]

Evanhuntrc
How's the wheelie bar working for you? Mine seemed to be so soft and just flips back.

[Mike_C]

Mine works just fine

[Nascaryan]

Mine works great, and I fit the rear bumper back on too. I'll get a few pics up when I can, but it works great for me.

[c0nr4d]

I better checked how I installed it lol. Same wheelie bar from the mini revo right? Pics would be cool to see. Thanks guys