What's the max voltage for the Link receiver 2218?

[ThacoVXL]

i am using a bec for my servo, what's the max voltage i can put through this RX?
i have it at 6.0v, my servo will handle 7.4v, so i would like to turn the BEC up more, but i don't want to take a chance with the receiver.

[danielhr77]

6.0v, may be just a little more, but, not 7.4.

[ThacoVXL]

yeah i saw that on the site, i was hoping maybe someone's got some actual tests, i would be happy with about 6.5 or so, i don't expect 7.4 at all.

[ksb51rl]

You don't need to run the UBEC's voltage through the Rx. You can run the servo off the UBEC and run the Rx off the ESC's BEC.
See post #43 or post #58. There are others in the ERBE forum