trx 15 pro exsaust line
I have a trx pro 15 on a hpi NMT and when it gets to operating temp it want to just bog off. But if I take off the fuel line that comes from my pipe it runs ok. But till it gets warm it runs great it will fly (almost). This is a new motor that I have just broken in I let it idel through about 8 tanks so I think I have done it right.
Thanks in Advance for any help
No don't drill the hole out bigger, that could cause a bigger problem. what are yor settings at on the carb? Mine used to do that all the time because it was to rich, try leaning it out a little and check primer bulb for a tear and the gaslines
It sounds as if you have to much exhaust pressure. Check the exhaust pipe for any thing that may be blocking the exhaust outlet.
excuse me while I pass some gas
I have checked the exaust and it is clear should I drill out the stinger a little to help relieve more pressure.