Remote Glo Ignitor systme

[nitroboy543x]

i was boared, and i wanted to make a glo systme so that i wouldnt have to maule up bodies to start the engien Efficiently.. i used some of my old ez start wires and a glo plug charger jack. here are the pics

http://www.printroom.com/_vti_bin/Vi...=11&courtesy=1

http://www.printroom.com/_vti_bin/Vi...=10&courtesy=1


http://www.printroom.com/_vti_bin/Vi...d=9&courtesy=1

it works realy good, and is kinda cool.

[nitroboy543x]

TonighT is slow, back To The Top(duno why caped the T's)

[boltaction]

dude thats not a bad idea! did you use the yellow wire in there also? or just the blue wire and the end of a charger for a glow ignitor?

[nitroboy543x]

the blue and yellow wire make a complete circut by passing throught the glo plug and the metal engine block. when the electrisity goes through the gp, it heats up, and then the circut is complete



Sorry for my bad spelling,i cant tipe for beans today

[Traxxas2oo2]

Yeah, thats how it works with the ez start, but if you use a direct current from the glo igniter, I don't think it is required. Correct me if i'm wrong....

[nitroboy543x]

the ez strt has a DC cell, so dose my glow ignitor. thats why on my chargeing jack there are two wire, and 2 wires on the ez start?, so yes you are wrong both wires are required.. i cant just take the plug out of the engien and plug it in, it needs the oher wire.

[Thunder_Mike]

Now were did you get that idea?

[nitroboy543x]

hrrm, you never told me how you did it...., i figured it our all by my self