Protoform or HPI???

**tacobellracer** · 03-28-2002 11:23 PM

Hello.I am going to be buying a new body for my nitro 4-tec. Many people have said that different brand bodies fit better than others so.....which bodies fit the 4-tec better-Protoform or HPI? ANy help is appreciated.Thank you and have a nice day.

**notraction** · 03-28-2002 11:27 PM

i have been wondering the same thing.

**kcrunch racer x** · 03-29-2002 05:24 PM

which ever body u cjoose make sure that it is 190 mm they are the bods that are a nice fit the stratus bod is nice and so is the civic i have a lambourgini bod that i use for my other 4tec it looked nice too

**notraction** · 03-29-2002 06:10 PM

i just bought a 200mm hpi toyota supra body that i'm painting pearl white. i'll let you guys know how it turns out

**satanicone** · 03-29-2002 07:58 PM

Originally posted by notraction
i just bought a 200mm hpi toyota supra body that i'm painting pearl white. i'll let you guys know how it turns out

i have that body. but i painted it outlaw black and it looks sweet. but placing the red decals is hard to slap on.

**notraction** · 03-29-2002 08:04 PM

i'm making it look more like a street car supra rather than a race car supra. the only decals going on it are the supra logos,the toyota logo on the front,and trd logos in the quarter windows. i'm even leaving the wing off of the back(i know it will look kind of strange)

**kcrunch racer x** · 03-29-2002 08:58 PM

Originally posted by satanicone

i have that body. but i painted it outlaw black and it looks sweet. but placing the red decals is hard to slap on.

an easy way to place stickers is to have a spray bottle w/ soapy water in it not too soapy but just a little.
spray your body in the area that u are placing the sticker then apply the sticker and slide it in to place.

allow it to set and cure to the body and u r on ur way it works everytime

**Edgar** · 03-29-2002 09:04 PM

I prefer HPI bodies , have more detail and normally coems with everything neede to paint and install them. The soak tip is a very good one.

**deagle** · 03-30-2002 02:34 PM

I just recently aquired my nitro 4-tec and have only done 2 bodies...but I have noticed that the wheel wells do not seem to line up as perfectly as they should(the wheel base seems a little too long). Since kcrunch racer x mentioned using 190mm bodies...I had to ask if that will solve the problem...?? Has anyone had any similar problems? and is there any reason not to use 190mm bodies instead of 200mm?

Thanks

**notraction** · 03-30-2002 02:34 PM

well, i finished the supra body today, it looks good considering it is the first one i have ever painted. next i'm getting a camaro ss body. i'll take my time on that one

**rcwoodtek99** · 03-30-2002 06:21 PM

imo the 200mm fit better. you have to cut away too much in the front to get full steering. i just bought a 190mm corvette body and i had to do this. the other 200mm bodies i have done seem to be better. bmw and monte carlo. maybe cause of corvette - maybe not. i will never buy 190 again.

**kcrunch racer x** · 03-30-2002 07:00 PM

190 mm is the bod size for the 4tec not 200 it is too big

the wheels are recessed instead of just right like with the 190 and with a little skill and the correct scissor the bod cutting is no big deal

**Edgar** · 03-30-2002 07:09 PM

If you use ht estock wheels , you can use the 200mm body , if not you should use th 190 MM body, by the way the WB of the 4 tec is a little longer than HPI, that is why the wheels doesnt fit perfectly in the wells

**rcwoodtek99** · 03-30-2002 07:09 PM

it comes with a 200mm body. if the from track is 194 and the rear is 198, why would you put a 190 body that doesnt fit right.

http://www.traxxas.com/products/nitr...4tec_specs.htm

jamie_gsi · 03-30-2002 07:14 PM

you guys in the states get all the good shells and in the uk we get all the py old ones, no fair

**deagle** · 03-31-2002 12:41 AM

are there any manufacturers of bodies that have the correct wheelbase for the 4-tec?

**deagle** · 03-31-2002 02:10 AM

are there any manufacturers of bodies that have the correct wheelbase for the 4-tec?

**kcrunch racer x** · 03-31-2002 04:31 PM

for those of u sho choose buy a 200mm but i tel u the size to buy is 190

a 200 mm bod is 6 mm too big it will be much wider

the actual size of the stock bod is 194

**nf2_4-tec** · 03-31-2002 05:52 PM

Either one will work, so its your decision. I had a feeling that the 4-tec was a little to small for 200, but a little to big for a 190

**lil-g** · 04-04-2002 01:29 PM

I bought an HPI 200mm Skyline body and it fits great. I painted it black with chameleon colored (color changing) flames. took me 4 days just to get the tape done for the flames. And I would of paied $30 per ounce of the color changing paint but my uncle works in a body shop os i got it for free.

Thread: Protoform or HPI???

Thread Tools

Display

Hybrid View

Protoform or HPI???

Posting Permissions