Page 1 of 4 123 ... LastLast
Results 1 to 40 of 138
  1. #1
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,145

    The Official Traxxas Stampede 4x4 Video Gallery. Post your Videos here!

    Quote Originally Posted by Misbehavin'
    Per member request, we're going to try a video gallery for the Stampede 4x4 forum. I expect everyone here to follow the rules below, as well as the general forum rules. If foul language, dangerous behavior, or other issues become a problem with the videos here, the thread will be deleted without warning.

    To paraphrase from another forum:

    Welcome to the Official Traxxas Stampede 4x4 Video Gallery. This is a place where you can post your videos to show off your truck and/or your driving skills. Please read the following guide lines:

    • This thread is for videos of your Traxxas Stampede 4x4 only. If you have a question for one of the people posting a video, please send them an e-mail or a PM so the thread does not get filled up with people talking. This is a place for videos not people asking what body or tires someone is using.
    • When you post a video, it would be greatly appreciated of you would post a detailed summary of what hop-ups you had on your vehicle at the time the video was taken.
    • Anything off topic will be deleted.
    • Any dead links will be deleted.

    RC Car Action, First Look
    Last edited by TRXse7en; 10-23-2010 at 12:57 PM.
    Pede, Summit,
    ERBE, Rally,
    Motley Crew, 1SQ

  2. #2
    RC Champion
    Join Date
    Jan 2007
    Location
    Michigan
    Posts
    1,678

    4x4 Pede on Traxxas test track @ IHobby

    Found this vid on the web, to me stability maybe a bit questionable? although watching it a few times it could just be the driver/operator.

    I was just stoked when I heard the news....I'm pretty much sold on this.
    Last edited by dave00bear; 10-23-2010 at 01:28 AM.
    My previous sig conflicted with a forum policy.

  3. #3
    RC Turnbuckle Jr. rag6's Avatar
    Join Date
    Mar 2008
    Location
    PM me if ya wanna bash at Greenwood Bashplex in Pittsburgh PA
    Posts
    13,151

    theJANG's initial review vid

    These apparently are now in circulation. First "real" vid I have found:
    http://www.youtube.com/watch?v=GutmQDukszA
    Wanna bash at Greenwood Bashplex in Pittsburgh ???

  4. #4
    RC Competitor
    Join Date
    Dec 2010
    Location
    chicago il
    Posts
    90
    stampede vxl 4x4
    slash 4x4
    summit

  5. #5
    RC Qualifier
    Join Date
    Dec 2010
    Location
    Shumway, IL
    Posts
    283
    Merv VXL x2

  6. #6
    RC Qualifier
    Join Date
    Mar 2006
    Location
    Canada, Québec
    Posts
    588
    Stampede 4x4 1415 1Y 2400kv, 4S 5200 30C

  7. #7
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,145


    As per the rules:
    MMP ESC/2650kv motor
    Venom 3S 35C 5000mah battery
    King Headz motor mount
    Traxxas bearing adapter
    Lots of RPM bits and pieces
    All Slash 4X4 Platinum aluminum upgrades
    Proline 30 Series Badlands tires on Torque rims
    Proline Hummer SUT body

    Enjoy
    Pede, Summit,
    ERBE, Rally,
    Motley Crew, 1SQ

  8. #8
    RC Enthusiast
    Join Date
    Dec 2010
    Posts
    41

    concrete slap!

    Just a jump in the warehouse...about 35' long, landed hard but no breakage.

    Stock Stampede 4x4 vxl, ******* 3S 3600mah 30C, body lowered using the battery bracket pins.

    Going up on the shock oil and throwing in a spring clip to soften the concrete slap on landing...

    Last edited by brentm3; 01-06-2011 at 09:26 AM. Reason: embedded the video instead of linking...

  9. #9
    RC Enthusiast
    Join Date
    Jan 2011
    Posts
    22
    @brentm3 ... Just so you know that ' means feet, i think you meant to use " for inches. lol...

    video:

    Pede 4x4 VS. Slash 2wd
    Last edited by zerolatency79; 01-06-2011 at 09:28 AM. Reason: had to add a video....
    Slash 4x4/Slash 2wd
    RPM EVERYTHING!

  10. #10
    RC poster
    Join Date
    Dec 2010
    Posts
    5

    Slash 4x4 vs Slampede 4X4 Snow jumps

    First the lowrider



    then the Slammer


  11. #11
    RC Enthusiast
    Join Date
    Dec 2010
    Posts
    41

    Stampede 4x4 at the track

    Took the 'Pede 4x4 to a track at a nearby Hobbytown. It really held its own against the SCT's. Ran it for over 3 hours today, 2 screws backed out, no breaks. If you get audio, that -SO- isn't my fault! First time I've tried AudioSwap!


  12. #12
    RC Enthusiast
    Join Date
    Dec 2010
    Posts
    41

    Trackside angle...

    I didn't know that this was filmed too...trackside angle giving a better idea of how well the Stampede was handling its track experience. I threw in a nice cartwheel-into-wall in the last 10 seconds...

    Per the initial post, here's the setup:

    ******* 4000mah 2s 30C
    9 tooth pinion / stock spur
    +20% rate springs, alternate mounting positions
    Traxxas alum rear carriers (installed backwards) for 1.5 degrees rear toe
    Battery-post-body-lowering
    RPM a-arms
    Slash bumpers
    The brentm3 Ruler Mod


  13. #13
    RC Racer
    Join Date
    Jan 2011
    Location
    South Florida
    Posts
    154
    Nice vid man I have a feeling they will start making classes for the 4x4 because of how versitile the truck can be set up!

  14. #14
    RC Qualifier
    Join Date
    Dec 2010
    Location
    McHenry, Illinois
    Posts
    648
    Dude I'm In.. But have never been on a track!.. Need some lessons!
    When Boy When, Are You Gonna Get Your Act Together

  15. #15
    RC poster
    Join Date
    Jan 2011
    Posts
    17
    Quote Originally Posted by brentm3 View Post
    I didn't know that this was filmed too...trackside angle giving a better idea of how well the Stampede was handling its track experience. I threw in a nice cartwheel-into-wall in the last 10 seconds...

    Per the initial post, here's the setup:

    ******* 4000mah 2s 30C
    9 tooth pinion / stock spur
    +20% rate springs, alternate mounting positions
    Traxxas alum rear carriers (installed backwards) for 1.5 degrees rear toe
    Battery-post-body-lowering
    RPM a-arms
    Slash bumpers
    The brentm3 Ruler Mod

    Hey Brent,

    How do you like the rear carriers installed backwards (left on right and right on left) for less toe in. I have the aluminum rear carriers installed normally on my pede with 4 degree toe in but was thinking about switching them to opposite sides for less toe in.

  16. #16
    RC Champion
    Join Date
    Mar 2010
    Location
    Davenport, Iowa Quad Cities
    Posts
    2,470

    It's a Stampede 4x4 teaser. But I just had to since I couldn't contain myself. Too excited for these bad boys! Hope to get some great video up soon...
    Thrash It, Bash it, Break it, No Regrets!!!

  17. #17
    RC Racer
    Join Date
    Nov 2010
    Posts
    138
    Heres a little video of me and my boy getting down with the pedes'!! Hope you like it!
    http://<a href="http://www.youtube.c...BsvgHjCUXg</a>
    Last edited by P'noRcer; 02-11-2011 at 09:27 PM.

  18. #18
    RC Racer
    Join Date
    Jan 2011
    Location
    South Florida
    Posts
    154
    This is the correct link to PNo's video http://www.youtube.com/watch?v=ZBsvgHjCUXg

  19. #19
    RC poster
    Join Date
    Dec 2010
    Posts
    11
    blue lipo 3s 2650
    50 wt shock oil
    traxxas black rear springs
    front axles broken, 2wd mode lol
    skatepark madness, sorry vid sucks, blackberry

    http://www.youtube.com/watch?v=5wQUw-fy-Js
    http://www.youtube.com/watch?v=5-SEK6J37o8

  20. #20
    RC poster
    Join Date
    Feb 2011
    Posts
    1
    1rst post here =) but not new to the hobby in any way =D

    Practising some jumping. Car is pretty new and with the new diff it tends to nosedive quite easy.In fact it feels quite hard to get nose up Mid-Air.. But became much nicer to drive
    Non stock is:
    Tires and wheels (from a Himoto truck)
    Center Diff(slash4x4)

    Battery:
    Lipo ********* hardcase 2s1p 5000mah

    It's fun!
    Last edited by johanr; 02-16-2011 at 02:06 PM.

  21. #21
    RC Champion
    Join Date
    Mar 2010
    Location
    Davenport, Iowa Quad Cities
    Posts
    2,470
    Thrash It, Bash it, Break it, No Regrets!!!

  22. #22
    RC Qualifier
    Join Date
    Feb 2011
    Posts
    360
    Man, sweet vid!

  23. #23
    RC poster
    Join Date
    Apr 2008
    Posts
    17

    My 4x4 pede

    http://www.youtube.com/watch?v=gDVnmLcyIeQhttp://www.youtube.com/watch?v=qS-OtuUw9EIhttp://www.youtube.com/watch?v=dJ_aePDsjQI
    Checkout my youtube page at macksara29

  24. #24
    RC Competitor
    Join Date
    Feb 2010
    Location
    Lawton, OK
    Posts
    87
    Ran a little while I was at the track today. Stone-cold stock, even running the stock NiMH (was saving my lipos for the racing). Only Mod is that the body has been lowered.

    http://www.youtube.com/watch?v=GYg3o...er_profilepage
    ==
    Slash4X4 Jato Ten-TE T-Maxx P4de MERV SC10

  25. #25
    RC Qualifier
    Join Date
    Jul 2009
    Location
    SF Bay Area, CA
    Posts
    358
    A few videos I shot today at a spot I found near my house... pardon the blair witch shooting style... I had a Sanyo Xacti strapped to my TX so it's shaky in spots and not aimed right all the time.. but they came out decent I think..

    2s lipo, stock electronics, gearing, and drive train..
    upgrades:
    -traxxas alum carrier hubs all around and caster blocks in the front
    -RPM a-arms
    -50K diff fluid in the rear (going with 80k soon and 50K in the front)
    -pro-line trencher tires on all-star wheels
    -pro-line Chevy C-10 lid
    -traxxas alum / bearing wheelie bar wheels





  26. #26
    RC poster
    Join Date
    Jan 2011
    Posts
    1
    Box stock apart the body.
    Battery is a cheap 4000mah lipo.


  27. #27
    RC Qualifier
    Join Date
    Jul 2009
    Location
    SF Bay Area, CA
    Posts
    358
    That's got to be a 3s ^^ right?

    another little video I shot yesterday... truck wasn't running right though.. front diff was binding badly and had the camera angle on my TX weird.. anyways.. I chopped this with windows movie maker and it makes things look more blurry to me.. anyways..


  28. #28
    RC Racer
    Join Date
    Mar 2011
    Posts
    106
    Well I hope they are not to big 2 vids just click on them
    first at a mall parking lot running a 2S
    Other just testing it out in the mud using a 8.4 Orion


  29. #29
    RC poster
    Join Date
    Mar 2011
    Posts
    1
    Here's videos of my brother and I bashing my Pede 4x4.

    http://www.youtube.com/watch?v=LUy8KeojqAQ

    http://www.youtube.com/watch?v=ci7DzQejpwU

  30. #30
    RC Enthusiast
    Join Date
    Apr 2011
    Posts
    25
    Couple vids of me and my kid jumping on a $10 homemade ramp.



    Last edited by fourthmeal; 04-10-2011 at 01:52 AM.

  31. #31
    RC Racer
    Join Date
    Mar 2011
    Posts
    106

  32. #32
    RC poster
    Join Date
    Dec 2010
    Posts
    8
    Hey this is formerly pedemon954 heres some videos...Will post a thread later on updates and the setup.
    http://www.youtube.com/user/pede4x4FLA

  33. #33
    RC Enthusiast
    Join Date
    Apr 2011
    Posts
    25
    Made a new vid today.


  34. #34
    Traxxas Employee
    Join Date
    Sep 2010
    Posts
    13

  35. #35
    RC Qualifier
    Join Date
    May 2010
    Posts
    847
    Had-> MERV, ERBE, Stampede 4x4

  36. #36
    RC Qualifier
    Join Date
    Jan 2009
    Location
    Sweden
    Posts
    487
    Got 2 movies here.

    *Stampede 4x4
    *MMP SCT
    *SCT2400
    *All RPMéd
    *All MIPéd
    *CasterFusion BigBore Shocks (Rear1.3/40w Losi|Front1.2/Losi30)
    *Futaba BLS451
    *Proline Badlands
    *RPM Wide Crawler rims
    *jConcepts Ford Raptor lid

    http://youtu.be/TQn-keT5jSg

    http://youtu.be/1YqUYTWa2W0
    Stampede 4x4 4s | Stampede 4x4 1/12

  37. #37
    RC Qualifier
    Join Date
    May 2010
    Posts
    847
    Bullet Time!

    Had-> MERV, ERBE, Stampede 4x4

  38. #38
    RC Competitor
    Join Date
    May 2011
    Location
    St. Louis, MO
    Posts
    80


    Heres me backflipping my rc truck messing around in the parking lot across the street. Pretty cool though huh?

  39. #39
    RC poster
    Join Date
    Jun 2011
    Posts
    11
    Here's my vid. Enjoy!



    parts:
    rpm a-arms all around
    mip x-duty cvd front and rear
    hobby wing xerun 2250kv motor and 80a esc
    mod 1 gearing 50t spur and 12t pinion
    strc c-hub caster blocks
    pro-line trencher tires
    pro-line power stroke shocks
    maxamps 3s 5250 lipo battery.
    pro-line ford f-150 raptor svt lid

  40. #40
    RC Champion
    Join Date
    Mar 2010
    Location
    Davenport, Iowa Quad Cities
    Posts
    2,470
    Thrash It, Bash it, Break it, No Regrets!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •