Results 1 to 11 of 11

Threaded View

  1. #1
    RC Turnbuckle Jr. danielhr77's Avatar
    Join Date
    Dec 2006
    Location
    Argentina
    Posts
    4,412

    TQ Link 2.4GHz - LED Mod

    Hello Guys,

    Today, I have something new for your TQ Link 2.4Ghz transmitters... A LED mod... The idea is to replace the green/red difused LED with a blue/red clear LED...

    To be honest with you guys, those green/red difused LEDs are old fashion... I started using them on my bike like 15/20 years ago and they haven't changed a bit since then and they are quite dim when you're out in the sun... So...

    1) Get some "5mm Blue / Red 3 Pin Common Anode LEDs"... Search on eBay for the clear ones...



    2) Find the LED inside your TQ Link 2.4Ghz transmitter...



    3) Remove the old difused green/red LED...



    4) Remove the solder from the three holes (not with a drill bit!!!)...



    5) Intall the new clear blue/red LED...



    6) Put everything back in as it was before...



    And, you have a 2010 version of the TQ Link 2.4Ghz transmitter...

    Hope you like it...

    Daniel

    Last edited by danielhr77; 10-20-2010 at 07:09 PM.
    200, 202, 420, humor 404, 301 to rc10talk, 410.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •