Results 1 to 6 of 6

Thread: Slayer Chassis

  1. #1
    RC Qualifier
    Join Date
    Mar 2008
    Posts
    705

    Slayer Chassis

    I have an extra Revo 3.3 chassis...the extended chassis. I was thinking about building a Slayer ground up. Is the new Slayer Pro chassis the same as the extended Revo 3.3 chassis? Thanks!
    If you can't beat it....destroy it!

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,790
    Yep. Quoted from here: http://www.traxxas.com/products/nitr...5907slayer.htm
    Slayer Pro 4X4 is built on the long-wheelbase 3D semi-monocoque chassis originally developed for the Revo 3.3.

  3. #3
    RC Turnbuckle Jr. fallonguy's Avatar
    Join Date
    May 2006
    Location
    Dayton Nv.
    Posts
    3,181
    Yes they didn't use the sliver chassis like on the platinum revo. When the slayer first came out it was on the same chassis as the 2.5 revo but it was sliver.
    I wanted to put a really cool signature but I ran

  4. #4
    RC Qualifier
    Join Date
    Dec 2010
    Posts
    274
    Sorry to bump an old thread but say I had a original slayer and used the revo extended chassis will my original slayer body still fit the body post?
    E-maxx 3903
    GraveDigger BL power
    Slash CC SCT

  5. #5
    Marshal Double G's Avatar
    Join Date
    May 2008
    Location
    Putting the wet stuff on the hot stuff
    Posts
    9,790
    Since the new Slayer is off the Revo 3.3 chassis, the body posts are further apart. So yes it will fit with modification but it may look goofy.
    The Super Derecho

  6. #6
    RC Qualifier
    Join Date
    Dec 2010
    Posts
    274
    Ok the stock bare aluminum chassis is fine just got the truck free.. Buddy threw the rod out of the crank case. Thanks for your help.
    E-maxx 3903
    GraveDigger BL power
    Slash CC SCT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •