Results 1 to 4 of 4
  1. #1
    RC Competitor
    Join Date
    Feb 2010
    Posts
    86

    Question illuzion overtray

    Has anyone tried an illuzion overtray on a 2wd slash with a VXL-3s and a protrac kit?

    Just curious on the fitment with the esc wires and installing a center body mount for the overtray. Also, is there a fitment solution without cutting the top out for the VXL?

    thanks.

  2. #2
    RC Turnbuckle Jr. El Sob's Avatar
    Join Date
    Feb 2010
    Location
    El Sobrante, Ca
    Posts
    7,562
    I am just gonna ask. What would be the point?

  3. #3
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,145
    You need to cut the top out to have it work with a VXL (just where the ESC mounts)
    Also, the protrac shock tower has no body mount (as you said) so when your trimming the chassis cover, leave a bit of extra material on the bottom at the back as it seemed to me the cover sat up a bit higher with the protrac kit. The other thing you could do (and what I would suggest) would be to use velcro on the back side of the chassis (in front of the rear wheels) to hold the cover on. it will give a more precise, tighter fit.
    Just some thoughts.
    Pede, Summit,
    ERBE, Rally,
    Motley Crew, 1SQ

  4. #4
    RC Competitor
    Join Date
    Feb 2010
    Posts
    86
    Quote Originally Posted by El Sob
    I am just gonna ask. What would be the point?

    More real estate for decals! What else?

    Thanks pavementsurfer. Good info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •