HELP-REAR AXLE CARRIERS

[OLDTIMER2]

I have a 4-TEC PRO.When using the housings labeled L and R the left will have 1.5 toe-in but the right will only be about .5 toe-in.I called Traxxas and in about a week I had two more sets.(Traxxas was very helpful)
I tried the new carriers it was the same!I called the local hobby store they gave the name of a man who has a4-TEC PRO so I called him.He said he has the same problem so he uses the 0-toe carriers.I want toe-in so can anybody help me

[need4speed]

is it the carriers or the arms that have the problem? either way maybe you could shave a bit of the material off to have the same on each side?

[RC Rick]

Thats strange to have them do that with out even being ran before. When I got my Powerline axle carriers, they were fine, and they don't change the toe in if you hit something. But really, if you can, try to get a hold of the Powerline ones.

- Rick -

------------------
2000 GOLD COBRA MUSTANG KICKS!

[NismoGTR]

Rick - do the Powerline's have any toe in?

[BIGSTEEZ]

NismoGTR:

Yes, the Powerline Rear Hub Carriers DO have TOE-IN. The amount is the same as stock, 1.5.