Well I just installed my 5.5 Novak HV and I already have a Mamba Monster Pro esc. I went in and changed the setting on the esc to auto lipo, 6v, smart sense. I hooked the wires up a/a, b/b/, c/c. The truck runs forward fine. I noticed that it would every now and then have a hesitation. I was running it and then I stopped it when I took off it went I stopped all of a sudden it took off and I lost all control of it. I ran it down cut it off, turned it back on and it seems to work ok. I checked my voltage on the Lipo's and they were ok. I did smell a burnt wire smell but everything doesnt seem hot, the fan wasnt on on the esc. What gives??