I really can't figure this out and would appreciate some input.
Replaced my fuel line to the carb today with a solid piece of high quality fuel tubing (Racers Edge) instead of the " trap" type inline fuel-filter.
I cant get the engine to run right at all now!
I have to lean the low-end to about 1.25 turns out to even keep it running!
I'll be in mid-throttle and it'll just cut out!
It seems that as a result of the tighter fuel line theres a very NARROW band of usable carb settings.
I replaced the solid fuel tubing with my old setup and it runs fine now but this just doesn't make sense!
I'm running a TRX Pro .15 (non-pullstart) and a MIP Stinger Pipe w/Racer's Edge coupler and a 9" pressure line (Racers Edge also).