Venom LiPo 2S 7.4V 5000mAh 20C
Venom LiPo 3S 11.1V 5400mAh 20C
Venom LiPo 3S 11.1V 6400mAh 20C "like this one"
Venom LiPo 3S 11.1V 5000mAh 20C
Anyone use the VENOM?
what would you use for the ERBE?
Venom LiPo 2S 7.4V 5000mAh 20C
Venom LiPo 3S 11.1V 5400mAh 20C
Venom LiPo 3S 11.1V 6400mAh 20C "like this one"
Venom LiPo 3S 11.1V 5000mAh 20C
Anyone use the VENOM?
what would you use for the ERBE?
you should look for a higher c rating for the brushless edition, like a 30c. 5000mah 30c i think is minimum suggested
20c x 64 = 128A. 100 is the minimum, so that is OK, but the others are too low IMO.
As Daniel said, the more Cs the better, but ensure you multiply by MAH to get a value ideally at around 150 or above
SMC Sport Max LiPo 7.4V 6000mAh 28C
60 x 28=168
Anyone use these?
thanks for all the input.....
MaxAmps Lipo 6500 7.4V E-Revo Pair
I have placed my order....
It's probably too late since you already ordered the Maxamps, but I run a set of these and they are great. I'm actually on my 2nd set since my 1st ones had problems with MAH and punch. A call to SMC and they tested them and sent me a new set. The first 3-4 cycles where really good and then by the time I hit the 5th cycle they really woke up. The punch is insane and will now run circles around my *****'s. Definitely happy with the performance and SMC customer service.Originally Posted by cmnyj28
I have another experience than cubsfan2010 one : mine puffed and lost their power after maybe 20 cycles... Really disappointedOriginally Posted by cmnyj28
![]()
Did you contact SMC? Mine had about 30 cycles and where 3 months old, but SMC still warrantied them. The new ones rock!Originally Posted by Popoxx
Although SMC won't say what was wrong, I think there was a quality issue with a batch and they fixed or re-engineered the problem in the newer batches.
thanks for the info cubsfan2010, I just went with MaxAmps Lipo 6500 7.4V E-Revo, Customer service is great at max amps so I went with them.