longer stub axles, axle extenders

[padrino]

I need to get maybe an extra .25-.5" on a side for an e-slayer/e-revo combination I built. I have looked around some built can't find any extender setups for the e-revo with 17mm. If anyone has an idea please share.

[BBBB]

If you have 8mm stub axles these will work perfectly, I just put a set on both my trucks, because I have ekno axle carriers on both trucks and they came with 8mm stub axles, so here are the 1/2" offset hexes: http://www.horizonhobby.com/Products...rodID=LOSA3533, if you would have looked I put a thread about these on here. If you need the pins and nuts here they are: http://www.horizonhobby.com/Products...rodID=LOSA3531

[ThacoVXL]

thin out the wheels, that's all you can do.

[padrino]

thin out the wheels, that's all you can do.

Thin out the wheels, I'm not sure what you mean. I have 17mm short course truck wheels on it now and I suppose the problem is they are too thin, I want to get them further out so it has a wider stance.

[glbobo]

Ofna or Hobao mke them from 2mm up to 12mm or so. Not sure about axle sizes.
Here is an example: http://www.amainhobbies.com/product_...-Extender-12mm

[candy76man]

Ofna or Hobao mke them from 2mm up to 12mm or so. Not sure about axle sizes.
Here is an example: http://www.amainhobbies.com/product_...-Extender-12mm

What he said


I have the half inch extensions on mine. You will have to upgrade to 8mm axles though as the adapters only come in that size, or at least that's all I've ever found.

[padrino]

Thanks, this is exactly what I needed..