New 4x4 Slash Owner
Just got a 4x4 slash and haven't driven it yet. Is there anything I should do to prep. I am not new to the hobby, I own a Stampede now and have owned a 4x2 slash and a rustler.
What parts should I stock up on?
Check gear mesh and slipper setting (mine was locked out of the box). Make sure to check all nuts and bolts for tightness. Locktight metal to metal screw contact. Check the servo arm travel to make sure it doesn't contact the center drive shaft (mine did and gouged the shaft). Stock up on normal parts. In particular, arms and rear axle shafts. Run the snot out of it for 5 or 10 minutes, then check it again and see if anything worked loose.
get the front thing that the drive shaft connects to and more axles those are the main parts i have seen that have been breaking
RC Turnbuckle Jr.
double ck & tighten ALL the screws. thread locker ALL the metal to metal contact screws.
Without completely disassembling it, where are the metal to metal parts?
Originally Posted by RC-Crazy
Check exploded views in the manual.
Most of the metal to metal parts are in the front c hubs and rear bearing carriers