I made a debris shield and it works great. But the Motor is running a little hot, around 210 degrees. I used an infrared thermometer and the only thing that was overheating was the motor. The ESC and battery were within the safe zone. I bought a heatsink/fan by Integy, model number C22470BLUE.
I wrote an email to Integy asking them how to install the connectors for the fan. They said that I can use an available slot from the receiver (which I have). The problem with that is the cable isn't long enough. He said I can use the ESC power output but the connectors are the same gender. Now, the package comes with extra wires, one end has bare Black/Red wires and the other has a connector that mates with the ESC. I can connect the wires together without soldering, but that would be kind of hokey. Is soldering the only solution in this situation? For those of you who have this Integy heatsink/fan, How did you make your connections? I've tried searching through this forum, but no luck .
Your help is appreciated,