Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Jul 2009
    Posts
    12

    Center driveshaft mod

    Someone in the forum had a post where they modified the center driveshaft with electrical tape and heatshrink tubing to decrease the gap where debris cold get into the shaft tunnel on the chassis. I have been trying to find the post again with zero luck. Can anyone point me in the direction of the post?

  2. #2
    RC Champion
    Join Date
    Feb 2009
    Location
    Sacramento
    Posts
    1,861
    in the front opening just tape it shut

  3. #3
    RC Competitor
    Join Date
    May 2009
    Location
    southern cali.
    Posts
    69

  4. #4
    RC poster
    Join Date
    Apr 2009
    Posts
    4
    That was a nice job with the heat shrink. I was thinking of trying to secure a peice of foam at each hole that way there is NO gap and would still be soft enough for any chassis flex.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •