Results 1 to 4 of 4
  1. #1
    RC Champion
    Join Date
    Aug 2008
    Location
    Waterford, NJ
    Posts
    1,452

    Well typical vxl

    my lipo's will only discharge to 11v with the lvc on o well good thing I have two of them
    My car learned how to fly then forgot the landing

  2. #2
    RC Champion
    Join Date
    Aug 2008
    Location
    Waterford, NJ
    Posts
    1,452
    what am I the only one that has this problem but one lipo did go down to 10.7 wooo
    My car learned how to fly then forgot the landing

  3. #3
    RC Racer
    Join Date
    Nov 2009
    Posts
    117
    What are you using to check the voltage?
    You might wanna check the checker or try a different Voltimeter to compare.

    Something's not reading right, either the LVC is tweaked or whatever you're using to check the voltage is giving wrong readings. That would be my guess.

  4. #4
    RC Champion
    Join Date
    Aug 2008
    Location
    Waterford, NJ
    Posts
    1,452
    I'm usimg the volt reader in my charger onyx 230 but I'm guessing it might be the vxl although it is a different one the 1/10 vxl has a huge problem with the lvc cutting off very early
    My car learned how to fly then forgot the landing

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •