Rod ends for the Alum toe links

[Only_Revo]

Anyone have a part number for replacement plastic ends for the toe links. Or aluminum ends.
Thanks.

[Notin_but_aRevo]

check the part list that came with your truck in with the manual

[Only_Revo]

check the part list that came with your truck in with the manual

Its not in there, maybe you should take your own advice.

Anyone have any useful info?

[TheMajekalBum]

if they are the traxxas ones then you need to buy a whole new set, you can't get just the rod ends. People have tired. Maybe take a end to your lhs and see if they got any ends that are close to the same size.

[Blone]

I couldn't find them either, so I cut the end off of one of the stock toe links to the same length as the rod end, carefully drilled a hole and threaded it onto the toe link, works fine.

[Hummerdude]

That's a freaking joke...

[Core]

That's a freaking joke...

that they don't sell replacement parts/ends ?
i agree.
i have a set of the traxxas toe links and refuse to buy another set (since i've already been through 1 set as "parts"). there should be a box on my porch either today or tomorrow that has the HR ones in it that you can get replaceable parts for and don't have plastic ends.

[Only_Revo]

I was thinking about getting the HR ones, but a few local guys here bent theirs. But they drive their trucks hard and hit everything on the track.

[TheMajekalBum]

I got the hr buckles and they've taken some pretty hard hits without bending. Last hit half removed my bellcrank, broke my front bulkhead and the toe link ripped outta the bell crank. My only complaint s the amount of slop the links have. Both links allow about 5* of toe variation together.

GPM just came out with a $23 pack thats got turn buckles and push rods with plastic ends, if you want something without slop (guessing since its plastic ends). They come in 3 colors too, blue, red, or silver.

[Only_Revo]

I got the hr buckles and they've taken some pretty hard hits without bending. Last hit half removed my bellcrank, broke my front bulkhead and the toe link ripped outta the bell crank. My only complaint s the amount of slop the links have. Both links allow about 5* of toe variation together.

GPM just came out with a $23 pack thats got turn buckles and push rods with plastic ends, if you want something without slop (guessing since its plastic ends). They come in 3 colors too, blue, red, or silver.

Wonder if you can get replacement ends for them if you need them....