Page 3 of 4 FirstFirst 1234 LastLast
Results 81 to 120 of 146
  1. #81
    RC poster
    Join Date
    Feb 2012
    Posts
    2
    Here is some pics of my project 3905.

    Current Mods:
    Castle Creations 1717 (6mm shaft) upgraded with Boca Bearings ceramic ABEC5's front and back.
    Kershaw Designs over sized motor mount
    Kershaw Designs pinion gear
    Traxxas spur gear
    Castle Creations MMM V3
    2X Venom 5000mah 35C 3s
    Traxxas CVD's all around
    Traxxas splined 17mm hubs
    Twin 2075 servos
    Black anodized roll cage
    Proline Ford F-150 Raptor body
    HPI Black Tremor wheels and Phaltline tires
    HPI Black Dish wheels and GT-2 soft tires
    Fuel tube mod on stock shocks to lower stance
    Black progressive springs

    Upcoming Mods:
    RPM black front A arms
    RPM black Tru Track rear
    RPM shock towers
    RPM skid plates
    Aluminum bulkheads
    Tekno Maxx wing
    Traxxas 5141A black front toe links
    Dye chassis black and all remaining gray parts


    By swaze7 at 2012-06-22


    By swaze7 at 2012-06-22


    By swaze7 at 2012-06-22


    By swaze7 at 2012-06-22
    Last edited by swaze7; 06-23-2012 at 12:40 AM.

  2. #82
    RC Qualifier
    Join Date
    Oct 2011
    Location
    Quebec,Alma,Lac-St-Jean
    Posts
    252


    -Mamba ESC
    -Hpi Tork Motor 2200kv (same as the EMBE motor)
    -Traxxas CDV
    -Traxxas wheelie bar
    -Team Blue star aluminium shock
    -Rpm shock tower
    -Rpm skid plate
    -Rpm arm
    -Golden horizon aluminium bulkhead
    -Proline Masher tire
    -Gens aces 40C 5000mah 2s (4x) and 6s (2x)

    TOP SPEED ON GPS
    22/62 pinion and spur

    -On 4S 45MPH
    -On 6s 51MPH (3/4 throttle)





    Last edited by cooleocool; 02-28-2013 at 01:22 PM. Reason: post merge

  3. #83
    RC poster
    Join Date
    Aug 2012
    Location
    Brazil - Mato Grosso
    Posts
    2
    My E-Maxx
    Motor Epic D8 1750 Kv
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    Last edited by Heber Off; 08-28-2012 at 09:23 AM.

  4. #84
    RC Qualifier
    Join Date
    Aug 2011
    Posts
    271


    Started as Emaxx Brushless Edition

    Changes;

    Hobbywing 150A V2 XERUN ESC
    Futaba 4PKS RX / TX
    Axial 8 Spoke Chrome Wheels
    Proline Big Joe 40 series tyres
    HPI Vorza 17mm Hexes
    Tekno Axle Carriers
    RPM A-Arms (purple)
    Losi LST XXL CVD's
    Traxxas Steel CVD center driveshafts
    Stock diffs shimmed
    FLM Bulkheads
    FLM Shock Towers
    UE SuperMaxx Shocks x 4
    ProGraphix Emaxx Body

    Possibly in the future;

    FLM 1/8 Hybrid Diff / Bulk
    FLM Chasis
    Single servo conversion
    Last edited by Suteki; 09-07-2012 at 07:26 AM.

  5. #85
    RC poster
    Join Date
    Sep 2012
    Posts
    2


    Just a quick picture of my new Emaxx 3908 on top of my rusty car

  6. #86
    RC Champion
    Join Date
    May 2011
    Location
    Biloxi, MS
    Posts
    1,547






    Merv, Sl4sh, P4de, Embe, Slash
    2400/2200/4000kv

  7. #87
    RC Enthusiast
    Join Date
    Sep 2012
    Location
    tulsa ok
    Posts
    47
    [IMG][/IMG][IMG][/IMG][IMG][/IMG]my e-maxx with 5 minute paint job butcherd the charger using razor knife so it's now another basher body It appears I not got the posting pics thing down.sorry
    Last edited by tarus64; 10-21-2012 at 05:28 PM.
    drive it like you own it,full throttle

  8. #88
    RC Champion
    Join Date
    Feb 2012
    Location
    Brookline, NH
    Posts
    1,161
    Heres a few pics of my latest creation with colapsable blower extension and custom grill



  9. #89
    RC Turnbuckle Jr.
    Join Date
    Jun 2010
    Location
    Miami, Fl
    Posts
    6,731




    Last edited by cooleocool; 02-28-2013 at 01:26 PM. Reason: post merge

  10. #90
    RC Champion
    Join Date
    Mar 2012
    Location
    Grafenwoehr Germany
    Posts
    1,304

    I know it says 8ight T lol but it's not...

  11. #91
    RC poster
    Join Date
    Dec 2012
    Posts
    2
    My EMAXX let me know your thoughts.



  12. #92
    RC Qualifier
    Join Date
    Nov 2007
    Posts
    424
    Body off, poised for success.


    Tippin by Lunitic, on Flickr

  13. #93
    RC Qualifier
    Join Date
    Dec 2010
    Location
    Edmonton, AB (and looking for an RC buddy. PM me if you're from NE Edmonton!)
    Posts
    395
    Sig edited for awesomeness. NC

  14. #94
    RC Racer
    Join Date
    Sep 2005
    Location
    Denmark
    Posts
    230

    Gorillamaxx G2 CF E-maxx

    This is my latest of many E-maxx builds, this time with the following parts used:

    Gorillamaxx G2 CF extended chassis
    Gorillamaxx single speed conversion with RC-Monster idler gear
    Gorillamaxx motormount
    Gorillamaxx G3 race suspension
    Gorillamaxx rear skidplate
    Hardcore Racing titanium front skidplate
    Unlimited Engineering center cvd's
    Unlimited Engineering spider 8 diffs
    Unlimited Engineering ultralite diffcases
    Unlimited Engineering supershocks
    Unlimited Engineering RazorX knucklehead shocktowers
    Unlimited Engineering GenIV servosaver
    GreatAssembly bulkheads & braces
    Lunsford titanium hingepins
    Lunsford titanium turnbuckles
    Lunsford titanium pivotballs & retainers
    Proline Badlands tires på Desperado wheels
    Proline Jeep Cherokee body
    Futaba 3PM 2,4 ghz. radio
    9150 MG servo
    MIP CVD's front and rear
    FullforceRC rear bodyposts
    Robinson Racing Double disc slipper clutch
    Robinson Racing spurgear
    Robinson Racing pinion
    Traxxas front bodyposts
    Traxxas 17mm hex splines
    Traxxas knuckles

    You can see more pictures here:

    http://www.rcgalleri.dk/galleri/4244...x_g2_cf_e_maxx





    Last edited by cooleocool; 02-28-2013 at 01:21 PM.
    www.rcgalleri.dk/html/gal_visbil.asp?ID=2166

  15. #95
    RC Champion
    Join Date
    Feb 2012
    Location
    Brookline, NH
    Posts
    1,161

  16. #96
    RC poster
    Join Date
    Dec 2012
    Location
    summerville,south carolina
    Posts
    6
    [
    just got my emaxx brushless two days ago



    Last edited by cooleocool; 02-28-2013 at 01:24 PM. Reason: post merge

  17. #97
    RC Qualifier
    Join Date
    Nov 2007
    Posts
    424
    Heresy maybe, but here is my beloved E-Maxx next to my new Tamiya Super Clod Buster. The Maxx donated its no-longer-used EVX-2 waterproof ESC and one waterproof servo for steering duty, and I bought a new 6-cell Traxxas 3300 NiMH pack. The E-Maxx is my favorite still, but the stock Clod is fun in its own right and I look forward to seeing them side by side for years to come.

    I remember reading an article in RC Car Action comparing the Maxx to the Clod, and it's interesting to see how, despite looking much smaller, the Maxx maintains equal or better ground clearance over the Clod. The Maxx platform really was revolutionary upon release, so having an old-school runner next to (then) new-school tech is fun.


    Monstas by Lunitic, on Flickr
    Last edited by turbo_cat1; 01-24-2013 at 06:04 PM.

  18. #98
    RC Enthusiast
    Join Date
    Oct 2001
    Location
    Newcastle, Australia
    Posts
    40
    Here's my brushless emaxx with a freshly painted body! Pretty much stock just traxxas cv's, aluminum toe and steering links, integy piggybacks and a mip temp gauge. Hope these pics work....
    - E-maxx 3908
    -T-maxx
    -VXL Rustler
    -Rustler

  19. #99
    RC Enthusiast
    Join Date
    Feb 2013
    Location
    Trois-Rivieres, Quebec
    Posts
    46
    Hi, this is my E-Maxx Brushless 3908 a little bit modified!

    Most part are Integy :

    Integy Monster Evolution 5 Kit (A-Arm X8)
    Integy Forged Aluminum Front & Rear Bulkhead
    Integy Forged Aluminium Rear Shock Tower
    Integy Blue Aluminium Front Shock Tower
    Integy Evo 3 Steering Block (X4)
    Integy MSR8 Shocks (X4) with 60wt oil & Stock Blue Springs
    Traxxas Big Bore Front Shocks (X4) with 50wt oil & Associated MGT Springs (Gold)
    Skulls Shock Cover
    Traxxas ProGraphix Body 2 colors painted
    Traxxas CV Driveshaft complete kit
    RPM Bumper and complet skid plate
    Complete Telemetry Kit installed (at full speed I hit 82km/h)

    Work with Venom 3S 11.1V 5000mA 50C Lipo battery X2
    Desperado 3.8" Wheels 1/2" Offset 17mm & Badlands 3.8" Tires

    and a beautiful liscence plate :P






    The tuning machine, to adjust wheels


    Up in the air ! BMX Track


    At gravel pit!



    Thanks for watching...
    If you have any question please ask!

  20. #100
    RC poster
    Join Date
    Dec 2012
    Location
    summerville,south carolina
    Posts
    6






    here is some new pics of my emaxx brushless, i got new big joes tires and axial rims 8 spoke also got the center cvd drive shaft, and black aluminum toe links front and back
    Last edited by nonny999; 02-16-2013 at 08:38 AM. Reason: did it wrong

  21. #101
    RC Champion
    Join Date
    Feb 2012
    Location
    Brookline, NH
    Posts
    1,161
    heres a couple pics of latest changes.


  22. #102
    RC Competitor
    Join Date
    Jan 2011
    Location
    FT Stewart, GA
    Posts
    74
    Quote Originally Posted by adonismp82 View Post




    Bringing new life to the old girl.









    MMM
    RPM arms all around
    HPI Dodge body painted with rubber undercoating on the outside
    and some new shoes.
    Brustler
    Slash
    E-Maxx
    1/16 E-Revo

  23. #103

  24. #104
    RC Competitor
    Join Date
    Jul 2012
    Posts
    50
    I little carnage from today.






    HA HA climbed the hill one time to many. Wait I rolled down the hill one time to many. LOL
    Last edited by Smoke888; 04-06-2013 at 08:07 PM.

  25. #105
    RC Racer
    Join Date
    Jan 2013
    Location
    san antonio tx
    Posts
    165

  26. #106
    RC Enthusiast
    Join Date
    Mar 2013
    Posts
    33
    [IMG][/IMG]

    Sorry if pic above is too large

    Work in progress:

    Hobbywing SC8 120a ESC
    Hobbywing XERUN 4274 2000kv
    Gens Ace 5000m 2s
    RPM font a-arms
    RPM skid/wear plates
    RPM true track rear a-arm conversion
    Hot Racing front and rear bulkheads
    Aluminum front and rear skid plates
    Aluminum wheelie bar
    Proline bumpers
    Traxxas summit body w/ lights
    Traxxas big bore shocks
    Associated springs

    I do not know how to resize picture so here is a link to photos:

    http://s1359.photobucket.com/user/da...ideshow/E-maxx

  27. #107
    RC Competitor
    Join Date
    Jul 2011
    Location
    Russia, Moscow
    Posts
    52

    My Krohpit ATV 8x8 chassis based Traxxas E-Maxx/Summit.
    http://www.krohpit.ru/2012/10/8x8.html

  28. #108
    RC Qualifier
    Join Date
    Feb 2012
    Posts
    520



  29. #109
    RC poster
    Join Date
    Apr 2013
    Location
    Camp Bastion, AFG
    Posts
    1
    My E-Maxx Monster Truck build. If it's one thing I've learned it's DON'T BUT INTEGY. Enjoy the photos!
    I went with:
    FLM Chassis / Front & Rear Hybrid Bulk
    Integy Swing Arms, Shock towers, Body posts, Steering blocks
    Castle / Mamba Monster 2200kv Motor and ESC
    Traxxas 2.4 Receiver / Transmitter











  30. #110
    RC Competitor
    Join Date
    Jul 2011
    Location
    Russia, Moscow
    Posts
    52


    BTR-80

  31. #111
    RC Enthusiast
    Join Date
    Aug 2011
    Posts
    29




  32. #112
    RC poster
    Join Date
    Nov 2012
    Posts
    14

  33. #113
    RC poster
    Join Date
    Oct 2008
    Posts
    8
    Just finished my #3905 Mamba Monster 2 conversion. I still need some Lipos and work on my gearing. I'm looking forward to driving this beast. https://twitter.com/dokimoto/status/...325376/photo/1

  34. #114
    RC Enthusiast
    Join Date
    Jan 2013
    Posts
    45

  35. #115
    RC Enthusiast
    Join Date
    Jan 2013
    Posts
    45
    the one above is in front of the beach house in Baja! this one is behind the beach house


  36. #116
    RC Racer
    Join Date
    Jun 2013
    Posts
    112
    This i my E Maxx brushless and my stock E Maxx



  37. #117
    RC Enthusiast
    Join Date
    Jan 2013
    Posts
    45

  38. #118
    RC Enthusiast
    Join Date
    Jan 2013
    Posts
    45

  39. #119

  40. #120
    RC Enthusiast
    Join Date
    Jun 2013
    Location
    Selbyville, DE
    Posts
    21

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •