Official Brushless E-Maxx Gallery!

**swaze7** · 06-23-2012 12:04 AM

Here is some pics of my project 3905.

Current Mods:
Castle Creations 1717 (6mm shaft) upgraded with Boca Bearings ceramic ABEC5's front and back.
Kershaw Designs over sized motor mount
Kershaw Designs pinion gear
Traxxas spur gear
Castle Creations MMM V3
2X Venom 5000mah 35C 3s
Traxxas CVD's all around
Traxxas splined 17mm hubs
Twin 2075 servos
Black anodized roll cage
Proline Ford F-150 Raptor body
HPI Black Tremor wheels and Phaltline tires
HPI Black Dish wheels and GT-2 soft tires
Fuel tube mod on stock shocks to lower stance
Black progressive springs

Upcoming Mods:
RPM black front A arms
RPM black Tru Track rear
RPM shock towers
RPM skid plates
Aluminum bulkheads
Tekno Maxx wing
Traxxas 5141A black front toe links
Dye chassis black and all remaining gray parts

By swaze7 at 2012-06-22

**SkidMan** · 07-15-2012 06:07 PM

-Mamba ESC
-Hpi Tork Motor 2200kv (same as the EMBE motor)
-Traxxas CDV
-Traxxas wheelie bar
-Team Blue star aluminium shock
-Rpm shock tower
-Rpm skid plate
-Rpm arm
-Golden horizon aluminium bulkhead
-Proline Masher tire
-Gens aces 40C 5000mah 2s (4x) and 6s (2x)

TOP SPEED ON GPS
22/62 pinion and spur

-On 4S 45MPH
-On 6s 51MPH (3/4 throttle)

**Heber Off** · 08-28-2012 09:20 AM

My E-Maxx
Motor Epic D8 1750 Kv
[IMG]

[/IMG]
[IMG]

[/IMG]

**Suteki** · 09-07-2012 07:24 AM

Started as Emaxx Brushless Edition

Changes;

Hobbywing 150A V2 XERUN ESC
Futaba 4PKS RX / TX
Axial 8 Spoke Chrome Wheels
Proline Big Joe 40 series tyres
HPI Vorza 17mm Hexes
Tekno Axle Carriers
RPM A-Arms (purple)
Losi LST XXL CVD's
Traxxas Steel CVD center driveshafts
Stock diffs shimmed
FLM Bulkheads
FLM Shock Towers
UE SuperMaxx Shocks x 4
ProGraphix Emaxx Body

Possibly in the future;

FLM 1/8 Hybrid Diff / Bulk
FLM Chasis
Single servo conversion

**solbrothers** · 09-17-2012 08:08 PM

Just a quick picture of my new Emaxx 3908 on top of my rusty car

**Dr.J** · 09-24-2012 02:32 PM

**tarus64** · 10-21-2012 05:09 PM

[IMG][/IMG][IMG][/IMG][IMG][/IMG]my e-maxx with 5 minute paint job butcherd the charger using razor knife so it's now another basher body It appears I not got the posting pics thing down.sorry

**EMAXXBRUSHLESS** · 10-25-2012 08:28 AM

Heres a few pics of my latest creation with colapsable blower extension and custom grill

**RC-Fan** · 11-25-2012 11:47 AM

**Emaxx1991** · 11-28-2012 05:47 AM

I know it says 8ight T lol but it's not...

**todiefor2010** · 12-09-2012 09:09 AM

My EMAXX let me know your thoughts.

**turbo_cat1** · 12-09-2012 09:14 PM

Body off, poised for success.

Tippin by Lunitic, on Flickr

**zball94** · 12-30-2012 12:58 PM

**Klausen** · 01-05-2013 12:04 AM

This is my latest of many E-maxx builds, this time with the following parts used:

Gorillamaxx G2 CF extended chassis
Gorillamaxx single speed conversion with RC-Monster idler gear
Gorillamaxx motormount
Gorillamaxx G3 race suspension
Gorillamaxx rear skidplate
Hardcore Racing titanium front skidplate
Unlimited Engineering center cvd's
Unlimited Engineering spider 8 diffs
Unlimited Engineering ultralite diffcases
Unlimited Engineering supershocks
Unlimited Engineering RazorX knucklehead shocktowers
Unlimited Engineering GenIV servosaver
GreatAssembly bulkheads & braces
Lunsford titanium hingepins
Lunsford titanium turnbuckles
Lunsford titanium pivotballs & retainers
Proline Badlands tires på Desperado wheels
Proline Jeep Cherokee body
Futaba 3PM 2,4 ghz. radio
9150 MG servo
MIP CVD's front and rear
FullforceRC rear bodyposts
Robinson Racing Double disc slipper clutch
Robinson Racing spurgear
Robinson Racing pinion
Traxxas front bodyposts
Traxxas 17mm hex splines
Traxxas knuckles

You can see more pictures here:

http://www.rcgalleri.dk/galleri/4244...x_g2_cf_e_maxx

**EMAXXBRUSHLESS** · 01-07-2013 06:41 AM

**nonny999** · 01-18-2013 05:21 PM

[

just got my emaxx brushless two days ago

**turbo_cat1** · 01-24-2013 06:02 PM

Heresy maybe, but here is my beloved E-Maxx next to my new Tamiya Super Clod Buster. The Maxx donated its no-longer-used EVX-2 waterproof ESC and one waterproof servo for steering duty, and I bought a new 6-cell Traxxas 3300 NiMH pack. The E-Maxx is my favorite still, but the stock Clod is fun in its own right and I look forward to seeing them side by side for years to come.

I remember reading an article in RC Car Action comparing the Maxx to the Clod, and it's interesting to see how, despite looking much smaller, the Maxx maintains equal or better ground clearance over the Clod. The Maxx platform really was revolutionary upon release, so having an old-school runner next to (then) new-school tech is fun.

Monstas by Lunitic, on Flickr

**matty boy** · 01-30-2013 07:18 PM

Here's my brushless emaxx with a freshly painted body! Pretty much stock just traxxas cv's, aluminum toe and steering links, integy piggybacks and a mip temp gauge. Hope these pics work....

**Bones Crusher** · 02-03-2013 05:05 PM

Hi, this is my E-Maxx Brushless 3908 a little bit modified!

Most part are Integy :

Integy Monster Evolution 5 Kit (A-Arm X8)
Integy Forged Aluminum Front & Rear Bulkhead
Integy Forged Aluminium Rear Shock Tower
Integy Blue Aluminium Front Shock Tower
Integy Evo 3 Steering Block (X4)
Integy MSR8 Shocks (X4) with 60wt oil & Stock Blue Springs
Traxxas Big Bore Front Shocks (X4) with 50wt oil & Associated MGT Springs (Gold)
Skulls Shock Cover
Traxxas ProGraphix Body 2 colors painted
Traxxas CV Driveshaft complete kit
RPM Bumper and complet skid plate
Complete Telemetry Kit installed (at full speed I hit 82km/h)

Work with Venom 3S 11.1V 5000mA 50C Lipo battery X2
Desperado 3.8" Wheels 1/2" Offset 17mm & Badlands 3.8" Tires

and a beautiful liscence plate :P

The tuning machine, to adjust wheels

Up in the air ! BMX Track

At gravel pit!

Thanks for watching...
If you have any question please ask!

**nonny999** · 02-16-2013 08:29 AM

here is some new pics of my emaxx brushless, i got new big joes tires and axial rims 8 spoke also got the center cvd drive shaft, and black aluminum toe links front and back

**EMAXXBRUSHLESS** · 04-02-2013 02:41 PM

heres a couple pics of latest changes.

**adonismp82** · 04-03-2013 10:27 AM

Originally Posted by adonismp82

Bringing new life to the old girl.

MMM
RPM arms all around
HPI Dodge body painted with rubber undercoating on the outside
and some new shoes.

**Bayside Basher** · 04-04-2013 09:27 AM

http://www.flickr.com/photos/9443696...in/photostream

http://www.flickr.com/photos/9443696...in/photostream

**Smoke888** · 04-06-2013 07:47 PM

I little carnage from today.

HA HA climbed the hill one time to many. Wait I rolled down the hill one time to many. LOL

**red914slash** · 04-12-2013 02:05 AM

**razbus** · 04-12-2013 07:49 PM

[IMG]

[/IMG]

Sorry if pic above is too large

Work in progress:

Hobbywing SC8 120a ESC
Hobbywing XERUN 4274 2000kv
Gens Ace 5000m 2s
RPM font a-arms
RPM skid/wear plates
RPM true track rear a-arm conversion
Hot Racing front and rear bulkheads
Aluminum front and rear skid plates
Aluminum wheelie bar
Proline bumpers
Traxxas summit body w/ lights
Traxxas big bore shocks
Associated springs

I do not know how to resize picture so here is a link to photos:

http://s1359.photobucket.com/user/da...ideshow/E-maxx

**Krohpit2011** · 05-14-2013 04:23 AM

My Krohpit ATV 8x8 chassis based Traxxas E-Maxx/Summit.
http://www.krohpit.ru/2012/10/8x8.html

Thread: Official Brushless E-Maxx Gallery!

Thread Tools

Display

Gorillamaxx G2 CF E-maxx

Posting Permissions