some optical and technical changes

[downhiller]

Changes for the durability and for the scalig-look.

- Front Skid Plate Cover from New Era Models
- Rear Skid Plate Cover from New Era Models
- Roll Cage from New Era Models
- Berarrings for the Rocker





The window look is great and it helps cool down the Elecrtonics

[1FastPede]

Part number on those bearings? Does traxxas make them?

[downhiller]

no, thers not from Traxxas. But you can find them everywhere. Just look for the right size: 4mm x 7mm x 2.5mm

I bought them online in Switzerland

[RokeyLounge]

im not a fan of the slash at all to be honest, but the cut-out windshield replaced with mesh, and the cut-out window replaced with a grid of what looks like zip ties ( ? ) ..... it looks awesome! great mods! they are both technically functional, and somewhat realistic to the real truck.

again, great mod job!

[downhiller]

Thanks for your feedback. The thing that looks like zip ties are from an old Bicycle Tube. Cut in small strips and glue it to a net :-)

[H towns finest]

wow dude that looks really good........I love the side window grid you put on there

[SirPsycho]

what are the bearings for?

[Laxman101]

the bearings make the rocker preform smoother

[SirPsycho]

the bearings make the rocker preform smoother

what? i'm confused

[Laxman101]

adding bearings to the mix will make the motion of the rocker smoother and it will have less friction when in use

[SirPsycho]

what rocker?!

[FOX22]

Changes for the durability and for the scalig-look.

- Front Skid Plate Cover from New Era Models
- Rear Skid Plate Cover from New Era Models
- Roll Cage from New Era Models
- Berarrings for the Rocker





The window look is great and it helps cool down the Elecrtonics

That Rollcage will it fit on the E-Revo?

[flatblack]

Tell me about the side window nets. Been trying to figure something out for my Baja.

[concreat]

Tell me about the side window nets. Been trying to figure something out for my Baja.

all it is, is inner tubing off a bike, which has been cut into strips and glued.

[tfrahm]

what rocker?!

The 'rockers' are the gray plastic pivots that connect the shocks to the red links that go down to the a-arms... The rockers only have plastic bushings from the factory, creating excess slop/play in the suspension movement -- replacing the bushings with bearings makes everything smoother and less sloppy....

[JatoTheRipper]

Nice work on the window nets!

[downhiller]

Thanks @ all for the positiv feddback ...

That Rollcage will it fit on the E-Revo?

yes, it will fit on Revo

all it is, is inner tubing off a bike, which has been cut into strips and glued.

Exactly