What gear again?

[MoonDeville]

Hello. It's me Confused again! So I got my 2S 2200 Zippies, made my Para cable and ready to rock. But should I run the speed pinion? I hope the answer is yes and that it'll be fast. Cuase I allready changed it before thinking and it was a booger to get the motor off. So Yay or Nay?

Moon

[POD87]

You can run it like that. It will be a bit slower then the 28t but it should help keep temps down. I run with the 28t and it gets a little warmer then i would it to. I might switch to the speed pinion yet and give that a shot.

[radicalray]

Yep use 23t work your way back up if your temps stay down
Here's my experience so far from previous post
http://monster.traxxas.com/showthread.php?t=483723

[MoonDeville]

Yep use 23t work your way back up if your temps stay down
Here's my experience so far from previous post
http://monster.traxxas.com/showthread.php?t=483723

Slower eh? How much slower would ya guess?

Moon

[chadm]

I'm running 2 1600 maxamp minh in series with the 23 pinion,
after the I run thru a set of bats I let it cool for about ten minutes.
Then just a few minutes into the next set of packs I'm thermaling.
Could I lose some heat by going with a different gear combo?
I have 45 50 55 spur and 28 23 20 pinions.
Thanks Chad