Results 1 to 8 of 8
  1. #1
    RC Champion
    Join Date
    Sep 2004
    Location
    nj
    Posts
    1,090

    bigsquid RC mini e-revo video

    Thanks
    Z....

  2. #2
    RC Qualifier
    Join Date
    Jan 2009
    Location
    Sweden
    Posts
    487
    It looks real indestructible this little Revo...cant wait to get min now . but it looks like the shocks are empty..a few times it loks REAL "springy".. :/
    Last edited by Thomas P; 06-14-2009 at 11:30 AM.
    Stampede 4x4 4s | Stampede 4x4 1/12

  3. #3
    RC Qualifier
    Join Date
    Nov 2006
    Location
    NC
    Posts
    410
    Looking great, can't wait to get them.

  4. #4
    RC Qualifier
    Join Date
    Nov 2008
    Posts
    340
    Dude stated in the video that he was running 4s. stock with no problems. I thought it was a no go due to thermal shut down if you ran higher than 3s?
    Revo 5308
    OS 18tm
    Maximizer 17mm Bead Locks

  5. #5
    RC Turnbuckle Jr.
    Join Date
    Nov 2006
    Location
    USA
    Posts
    3,040
    Quote Originally Posted by FyrFytr998
    Dude stated in the video that he was running 4s. stock with no problems. I thought it was a no go due to thermal shut down if you ran higher than 3s?

    No, the esc does not have a lvc setting for 4s

  6. #6
    RC Qualifier
    Join Date
    Nov 2008
    Posts
    340
    So he was running 4s with an external LVC then? Now I'm all confused as to how to set this up without frying the truck. You'll have to forgive if this has been covered elsewhere. I've been off the boards to avoid the endless can't wait threads. Things got a bit monotonous around here.
    Revo 5308
    OS 18tm
    Maximizer 17mm Bead Locks

  7. #7
    RC Turnbuckle Jr.
    Join Date
    Nov 2006
    Location
    USA
    Posts
    3,040
    Quote Originally Posted by FyrFytr998
    So he was running 4s with an external LVC then? Now I'm all confused as to how to set this up without frying the truck. You'll have to forgive if this has been covered elsewhere. I've been off the boards to avoid the endless can't wait threads. Things got a bit monotonous around here.

    you do not need a lvc with lipo, and I don't think he used one in the vid
    using a lvc is protection that your batteries do not go below a volt amount

  8. #8
    RC Qualifier
    Join Date
    Jun 2003
    Location
    Crestwood, Il.
    Posts
    459
    no, i didnt have any low voltage protection. i have been running lipos for a long time and know when to stop.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •