Results 1 to 4 of 4

Hybrid View

  1. #1
    RC Racer
    Join Date
    Mar 2009
    Location
    Boothwyn Pa
    Posts
    224

    DeWalt Motor = SLOW!!!!!

    Ok just did DeWalt motor mod and works great, tons of power, very good fit, problem is its SLOW AS HECK, now im running 14/62 because of the lack of 5mm pinion selection at my LHS. So Im gonna order up some pinions and spurs but would like to know what would be the best setup for speed, 18/54? Im running both twin 7 cell 8000 mah nimh also 2S 25c 4000 mah lipos when not running in wet conditions, stock wheels and tires. Thanks
    If you dont like it, just change the warranty.

  2. #2
    RC Turnbuckle Jr.
    Join Date
    Feb 2009
    Posts
    4,902
    You can drill out your 1/8" bore pistons to 5mm and use them if you want, lots of people do it.

    You can gear it way up, too...I have seen people on here running 25/54, so I would assume 25/62 would be fine (I don't know for sure, wait for more answers).
    Project: BL Revo Race Quad & BL G-Maxx G3R CF Revo

  3. #3
    RC Racer
    Join Date
    Jan 2009
    Location
    las vegas
    Posts
    231
    here is some speed runs i did with mine
    52tspur 22pin=23.43mph
    68tspur 20pin=18.57mph
    62tspur 22pin=22.1mph
    68spur 22pin=20.02mph

  4. #4
    RC poster
    Join Date
    Apr 2009
    Posts
    15
    How does the Dewalt compare Vs the Titan 775 for speed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •