1/16 Scale E-Revo & Slash Picture and Video Gallery

**ngnaw** · 03-20-2011 04:48 PM

Here's a video I made running the MERV outside on the street. Watch at the end, annoying kids lol!

**oldnotwise** · 03-21-2011 12:55 AM

My snow skimming merv with my custom paint job

**Double A21** · 03-29-2011 08:52 PM

New Sidewinder Sv2 4600kv Combo with traxxas big block kit
New Servo
Diffs will be rebuilt this week
possibly a new proline slipstream body
and Gpm stainless steel pushrods and turnbuckles if the toyz ever gets them back in stock

**willy911** · 03-30-2011 08:54 PM

Just got my Voltswagon body, new ESC, and RPM knuckles, a-arms, front and back bumpers, and aluminum body mounts. have a look, check out my other vids on youtube.

**CosmosGoat** · 03-30-2011 09:23 PM

Pics of my MERV with a few mods.

Black/Tan springs
RPM front bumper
Traxxas wheelie bar
2S and 3S lipos
Traxxas 7171 dished rims
Proline Road Rage tires
Align heat sink x2

I think it will stay this way for awhile until i break parts.

**EREVO316** · 04-06-2011 03:58 PM

Uploaded with ImageShack.us

**QYKSLVR** · 04-08-2011 03:41 AM

Wow there are some nice MERVs in here. Adding mine to t he list:

**Lost Sheep** · 04-14-2011 10:34 AM

[IMG]

[/IMG]/scottsteele11/4.jpg[/IMG][/IMG]d.jpg[/IMG][/IMG][IMG]

[/IMG]

**Lost Sheep** · 04-14-2011 10:35 AM

[IMG]

[/IMG]

**Lost Sheep** · 04-14-2011 10:36 AM

[IMG]

[/IMG]

**Lost Sheep** · 04-14-2011 10:37 AM

[IMG]

[/IMG]

**Lost Sheep** · 04-14-2011 10:38 AM

[IMG]

[/IMG]

**TheMajekalBum** · 04-16-2011 03:42 AM

Just upped a new video of my big block mini revo. It's a onboard video i threw together in the past few days, has a few slightly older clips in it. The electronics, gearing, and tires are listed in the video. i think it's a pretty sweet set up, i get 35-40 mph with big tires driving on grass with 2s and dont have to worry bout heat at all plus i have all the power i need while keeping it in control. Watch if ya want.

**Fox** · 04-16-2011 12:53 PM

Originally Posted by Evgen

wow! so their dimensions on HK are wrong again
which one you have? 25~50C or 35~70C?
do they fit as usual, with only cutting the edge of battery doors?

mine are the 35-70s

and yea just have to cut the end off the battery door. nothing major.

got a couple new bodies for my mini..got these airbrushed on eBay...$40 shipped for both of them...across border too!!(would've paid that plus more if they were new and clear..and from an online Hobbyshop)

I also upgraded to a HS 85MG Hitec steering servo

Slipstream

Crowdpleaser 2.0

**Nessaxo** · 04-17-2011 09:12 PM

My New E Revo! First car, and first paint job. Like it?

*I'm a girl so it's ok that it's purple

**QYKSLVR** · 04-17-2011 10:46 PM

i like the zebra stripes!

For sale

**pakratt** · 04-20-2011 04:26 PM

Slash to MERV conversion...

**Meebert** · 04-22-2011 08:21 PM

here's a current pic with the ofna 1/12 wing and MLST tires

**Fox** · 04-22-2011 08:37 PM

here's a little somethign different...

it's EL-Wire

(EL= Electro LUminescent)

inspired by the TRON series of movies...I hot glued it to the stock bod...but the glue didn't last so I"m gonna redo it with CA glue..it runs off 2 AA batteries with a switch to change it from constant to flashing to strobe...and i slide the little pack inside the battery compartment and it's got a handy connector so I don't have to remove the battery pack when I change bodies or if I decide to un the stock body with parallel 2s LiPos.

**Minimasta510** · 04-26-2011 04:40 PM

**eurofocus** · 04-27-2011 11:07 AM

I did a little change up and make a mount for the mamba esc so I can run two batts in parallel again. Turned out alright I think.

**Minimasta510** · 04-30-2011 02:17 AM

Nice job euro! And I like the green revo body you had posted in a thread somewhere.
Here's a pic with the body I just made it's posted here in the forum but wanted to put it here as well.

**koutroumpesis** · 05-01-2011 10:47 AM

my first car, my first paint job...

http://i1217.photobucket.com/albums/...s/DSC02981.jpg
http://i1217.photobucket.com/albums/...s/DSC02982.jpg
http://i1217.photobucket.com/albums/...s/DSC02985.jpg

i love this color

...and this car.

**Andrew55** · 05-03-2011 01:26 AM

**R-evo** · 05-06-2011 05:36 PM

My Mini Revo

**iqbbang** · 05-07-2011 03:59 PM

**Dr.J** · 05-10-2011 03:37 PM

titan 550 brushed conversion:

**hav24wheel** · 05-12-2011 03:47 AM

Here's my Merv.

Aluminum bulkheads, center skid, knucles, and wing.
RPM A arms. Steel front and rear skids, and steel center shafts. Hardened steel trans gears.
1/10 scale traxxas 3500 kv motor, MMP SCT.

I run a bug body, but don't have as good pick of that righ now.

**willy911** · 05-13-2011 09:55 AM

hey guys just figured id post a vid of my merv with my snow chains i made for it, this is when i first bought it in december and before i started putting upgrades on it.

**hav24wheel** · 05-15-2011 08:30 AM

I got a Summit body to put on my Merv.

**Maus** · 05-15-2011 09:40 AM

My Merv -

**Minimasta510** · 05-21-2011 09:49 AM

Now with my BB kit!

**Slash240** · 05-25-2011 02:05 PM

Dont see many Slashes so Ill add mine

**RCCARSTORE** · 05-25-2011 08:02 PM

**willy911** · 05-26-2011 12:59 PM

heres my merv on the hill out back and in the mud!

**ngnaw** · 05-28-2011 11:37 PM

My MERV with new wheels!

More pics
Pics

**drbunsen** · 05-30-2011 11:09 AM

Hey Folks,
Full RPM plastic arms.
Aluminum Shock towers.
GTR shocks
Aluminum turnbuckles.
Cheapo Toyz rims set(for bashing)
Anti-flip antenna

**Mr Camil** · 06-01-2011 12:02 AM

**willy911** · 06-01-2011 06:21 PM

Here's my Merv in the mud!

**filmmaker** · 06-03-2011 12:57 PM

I love this thing!

Thread: 1/16 Scale E-Revo & Slash Picture and Video Gallery

Thread Tools

Display

Merv Brook Driving

SNOW CHAINS on my merv!

the muddin merv

The Mudding Merv!

Posting Permissions