Page 4 of 18 FirstFirst ... 2345614 ... LastLast
Results 121 to 160 of 683
  1. #121
    RC Enthusiast
    Join Date
    Oct 2009
    Posts
    31
    Mine, Buggy is a few years old, only ran about 5 times, today being one of them. And the Merv is 2 days old. O.S .21 RG on the buggy and stock Merv, with 2x2S 1800 Lipos. 25C





    Last edited by Limegrntaln; 11-03-2009 at 03:10 AM.

  2. #122
    RC Qualifier
    Join Date
    Apr 2009
    Location
    COS Hammer Iraq
    Posts
    489
    Here is My MERV and Mini Slash, The MERV has metal CVD's, Aluminium turnbuckles, and front rockers at all four corners. Right now for the pic's it has the Carbonfiber shell I bought but I have a custom Prographics with safety Orange accents and the stock Silver shell.
    The Mini Slash is 100% stock right now but I have metal CVD's, metal turnbuckles and pushrods and will get the front rocker mod also. I will also be updating the body to the new JConcepts Truth body.




    "Obedience alone gives the right to command."

  3. #123
    RC Competitor
    Join Date
    Sep 2009
    Location
    the netherlands
    Posts
    50
    this is my e-revo ,i traded my rusty xl5 against it.it has 2 1500mah 3s lipo's
    http://i2.photobucket.com/albums/y44...eelding297.jpg

    Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo
    Last edited by cooleocool; 12-22-2009 at 07:01 PM.

  4. #124
    RC Turnbuckle Jr.
    Join Date
    Mar 2009
    Location
    San jose, California :D
    Posts
    4,681
    Think my revo is worthy enough of getting here now
    P.S..yes i know..the air scoop has rough edges..all of which have been smoothend out now.




    EMBE/ Savage X
    x2 BL slash
    Ultra lx1e

  5. #125
    RC Racer
    Join Date
    Oct 2009
    Location
    Montreal, Quebec, Canada
    Posts
    123
    My Traxxas Slash 1/16 VXL Brushless:

    http://www.youtube.com/watch?v=P7iRZc2XXgg

    - Made the track myself at Parc Lafontaine in Montreal, Quebec, Canada With two Traxxas Series 1 stock 1200mAh 7.2V NiMH battery packs in parallel (with the Traxxas adaptor) At an average I manage to do 45 min run time (average of 50%-75% speed let's say) Charging time is 6 hours with the given cheap Charger I also have the 1/16 E-Revo VXL Brushless, I'll post a video of it and link it here some day soon... Paid 338 $ for this Slash (including 2 Traxxas Series 1 batteries + 8 Alkaline batteries + shipping + tax) online at a shop in Edmonton, Alberta (Hobby Alley 5% rebate of total and bought also from Great Hobbies) I'm loving my two 1/16 cars so far :-P

    My 2 cars that I like so much!
    http://img691.imageshack.us/img691/7196/59407084.jpg
    http://img195.imageshack.us/img195/566/42775180.jpg
    http://img195.imageshack.us/img195/8353/18771078.jpg
    http://img17.imageshack.us/img17/3580/74246084.jpg

    Edited for size
    -Carraig042
    Last edited by cooleocool; 08-09-2010 at 12:46 AM. Reason: merge
    E-Revo 1/16 VXL BL
    Slash 1/16 VXL BL

  6. #126
    RC Qualifier
    Join Date
    Apr 2009
    Posts
    555

    my silver bullet



    IF YOU CANT FIX IT DONT BUY IT !

  7. #127
    RC Enthusiast
    Join Date
    Sep 2009
    Location
    Toms River, NJ
    Posts
    38

    Last edited by Skatin; 11-15-2009 at 04:27 PM.
    Too many RC vehicles / Spektrum DX3R

  8. #128
    RC Turnbuckle Jr.
    Join Date
    Apr 2006
    Location
    Broomfield,Colorado
    Posts
    3,367
    here's a short videop clip of my MREV, bone stock with carbon fiber rockers and a cut out motorcycle fender as a wing
    http://www.youtube.com/watch?v=_17HBkbLuYE
    I'm sorry about the loud yell in the middle, haven't edited it yet, I have more footage coming, more footage
    Last edited by I know pi!; 11-27-2009 at 10:48 PM.
    I memorized pi to 200 digits!

  9. #129
    RC Champion
    Join Date
    Jun 2008
    Location
    Winnipeg, Canada
    Posts
    1,048
    Theres some pretty nice minis in here

    Heres a shot of my new mini, and its bigger brother under construction

    After Xmas I will finish the big one, and hot rod the mini





    This little one is insane with 2 packs! Ive already broke the top left a-arm, as well as the top right rear one. Cant wait for RPM's new stuff to come out
    MBX5T|MMM/2200kv|16/46|Hitec 7955TG|KingHeadz

  10. #130
    RC Turnbuckle Jr.
    Join Date
    Apr 2006
    Location
    Broomfield,Colorado
    Posts
    3,367
    little snow?
    I memorized pi to 200 digits!

  11. #131
    RC Racer
    Join Date
    Oct 2008
    Posts
    246
    for the record:

    some jumping:


    and tracktime:


    at the Winter-Race

    please direct questions here:
    http://monster.traxxas.com/showthread.php?t=499862
    E-Revo,700HO/Novak5.5,5Ah LiPos
    Baja 5B SS
    MERV

  12. #132
    RC Enthusiast
    Join Date
    Jun 2009
    Location
    Charlotte, NC
    Posts
    37
    Here is my MERV haulin but in the street...

    http://www.youtube.com/watch?v=UtEGIjw6HvY
    My wife wont touch the heli but she loves my truck

  13. #133
    RC Enthusiast
    Join Date
    Dec 2009
    Posts
    35
    Nothing really special. Just some common sense mods.

    1800Mah 3S Lipos
    JConcepts tense wheels Goose bump Tires (taped and siliconed) titanium screws
    Center diff (120K fluid) front (100K)
    GPM hub carriers (teflon taped delrin)
    aluminum rockers, turnbuckles, and push rods
    Bearings in rockers
    Toyz motor heatsink with fan moved to the ESC
    All kinds of 48 pitch pinions (23T to 32T)
    60 wt shock oil (all of the traxxas option springs but running black right now)
    aluminum wheel hexes
    stock wings (carbon fiber look), one 3Racing wing (dyed yellow)
    J Concepts illusion and Proline slipstream bodies
    Toyz.com tires and wheels and lock nuts
    Dubro body clip retainers

    http://www.flickr.com/photos/45526854@N03/4182900832/
    http://www.flickr.com/photos/45526854@N03/4182900622/
    http://www.flickr.com/photos/45526854@N03/4182898288/
    http://www.flickr.com/photos/45526854@N03/4182446568/
    http://www.flickr.com/photos/45526854@N03/4181680917/

    I set up my camber using old Hudy 1/10 touring car set-up tools.

    Do you guys have any new hot set-ups, hop ups to share?
    If you think RC is cool you should see my day job!

  14. #134
    RC poster
    Join Date
    Jul 2009
    Posts
    7
    New lid

    Last edited by STV-218; 12-14-2009 at 09:16 PM.

  15. #135
    RC poster
    Join Date
    Oct 2009
    Location
    Ohio
    Posts
    8
    http://i86.photobucket.com/albums/k1.../revo002-1.jpg

    It's a mechanical break system i did back in july,and still today holding up strong,there are other mod's to it as well,variable rate shocks,front and rear low profile swaybar,the linkage in the front is to limit the travel of the rocker arms for high speed runs or drifting.and keeps those wheelies in control,it can be adjusted without taking the body off .

    http://i86.photobucket.com/albums/k1...20/revo012.jpg

    Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo
    Last edited by cooleocool; 12-22-2009 at 07:04 PM.

  16. #136
    RC Qualifier
    Join Date
    Nov 2009
    Location
    UK
    Posts
    838
    i wanted to see what would happen if i stuck a 1/10 scale truggy body on a converted mini slash with MERV arms.

    because of the rear bumper, it won't flip over, and will eventually correct its wheelie. unfortunately, the body didn't hold out too well, the back is cracked and a hole appeared in the top of the shell.

    http://img686.imageshack.us/img686/1691/img0382i.jpg
    http://img684.imageshack.us/img684/2311/img0383f.jpg
    http://img685.imageshack.us/img685/2193/img0384u.jpg
    http://img685.imageshack.us/img685/4625/img0385j.jpg

  17. #137
    RC Qualifier
    Join Date
    Mar 2009
    Location
    Alabama
    Posts
    646






    I finally got the JC's together.
    Slash 4x4 VXL
    Mini Revo VXL
    Rustler VXL
    Micro-T

  18. #138
    RC poster
    Join Date
    Nov 2007
    Posts
    4
    My MiniRevo Kamikaze:





    Last edited by DiabloAlex; 12-23-2009 at 05:47 AM.

  19. #139
    RC Enthusiast
    Join Date
    Dec 2009
    Location
    Germany
    Posts
    21

    Videos of my 1/16 E-Revo VXL

    Here are some Videos of my litle Fun-Beast the 1/16 E-Revo VXL.

    I'am driving it mostly with 3S LiPo, and installed the Metal Drive Shafts, and the Pushrods.

    Some fun in the snow:
    http://www.youtube.com/watch?v=7OUv2yFGw9E

    Some onboard Action
    http://www.youtube.com/watch?v=F-4LG3pDooM

    Some nice backflips
    http://www.youtube.com/watch?v=O1xhgsp1KXw

  20. #140

  21. #141
    RC Qualifier
    Join Date
    Apr 2009
    Location
    Codova, TN
    Posts
    861
    A few dollars laters



    MMP-NEU 1112 1.5D 4S MERBE
    BEAST MODE [ON] OFF

  22. #142
    RC poster
    Join Date
    Dec 2009
    Posts
    3
    Last edited by carraig042; 02-01-2010 at 11:42 PM.

  23. #143
    RC Champion
    Join Date
    Aug 2008
    Location
    Waterford, NJ
    Posts
    1,452
    http://www.youtube.com/watch?v=bH4piT-L4nw
    3s 1600mah lipo from spc is only difference from stock
    My car learned how to fly then forgot the landing

  24. #144
    RC poster
    Join Date
    Dec 2009
    Posts
    11
    Last edited by carraig042; 02-01-2010 at 11:39 PM.

  25. #145
    RC Enthusiast
    Join Date
    Dec 2009
    Posts
    35
    My 1/16 E-revo with new Shoes!




  26. #146
    RC Racer
    Join Date
    Oct 2008
    Posts
    246

    drift MERV



    E-Revo,700HO/Novak5.5,5Ah LiPos
    Baja 5B SS
    MERV

  27. #147
    RC Racer
    Join Date
    Aug 2009
    Location
    gilbert arizona
    Posts
    227
    stock FOR NOW!!! :P :



    they need to make the post limit longer

  28. #148
    RC poster
    Join Date
    Feb 2009
    Location
    Poland, Kielce
    Posts
    19
    |E-revo BL| + |E-revo VXL| + |Ford F-350|

  29. #149
    RC Enthusiast
    Join Date
    Jan 2010
    Posts
    48
    here is my mini revo completely underwater! http://www.youtube.com/watch?v=1Okzr8ZSMd8

  30. #150
    RC poster
    Join Date
    Jan 2010
    Posts
    18

    First day of Bashing!!

    http://i220.photobucket.com/albums/d...DSC_029922.jpg
    http://i220.photobucket.com/albums/d...DSC_030022.jpg

    Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo
    Last edited by cooleocool; 08-09-2010 at 12:28 AM.

  31. #151
    RC Qualifier
    Join Date
    Jul 2009
    Location
    Quebec
    Posts
    374
    My latest Winter configuration :





    What have you learned today?

  32. #152
    RC poster
    Join Date
    Jan 2010
    Posts
    18

    Weekend bashing onto wallpapers

    My VXL and my mates Rustler enjoy the images

    http://i220.photobucket.com/albums/d...Jeremycopy.jpg

    http://i220.photobucket.com/albums/d...7/Nukecopy.jpg

    Please comment

    Please keep images to 640 x 480 or smaller
    -Carraig042
    Last edited by carraig042; 02-01-2010 at 07:01 PM.

  33. #153
    RC poster
    Join Date
    Jan 2010
    Posts
    1

    1/16 e-revos in Afghanistan

    Me and my buddy got a couple of 1/16 e-revos to play with while we are in Afghanistan. The terrain is rough and changes daily with all of the construction over here so it is fun.

    here is a couple of videos from the other day. Hope you like we where trying to learn the camera it was our buddy's we missed a lot of good footage like head on collisions at almost full speed and accidently running over my buddy's car after he flipped. Video 1 was a hard landing that broke my rear body post mount and spoiler off. I also broke a servo gear in the head on collision. My buddy hit a building at about 25mph and broke a control arm and his front body post mount.

    The black one is running 2s lipo 2200mah and the red one is running traxxas batteries in parrallel we do have series connectors and will get video of some high speed runs as soon as we get some more time.
    http://www.youtube.com/watch?v=tmJtiK3x0aM
    http://www.youtube.com/watch?v=OUxT2u8PHyM
    Last edited by cooleocool; 04-03-2013 at 10:02 AM.

  34. #154
    RC Enthusiast
    Join Date
    Feb 2010
    Location
    chicago, IL
    Posts
    22
    my merv


    [IMG][/IMG]
    [IMG][/IMG]
    Mamba Monster mini Revo.

  35. #155
    RC Enthusiast
    Join Date
    Feb 2010
    Location
    chicago, IL
    Posts
    22
    Last edited by carraig042; 02-10-2010 at 11:30 PM. Reason: clutter
    Mamba Monster mini Revo.

  36. #156
    RC poster
    Join Date
    Feb 2010
    Posts
    1

    Kyle's 1/16 Slash

    What do you think?








  37. #157
    RC Racer
    Join Date
    Apr 2006
    Location
    Baltimore, Md
    Posts
    179

    my mini revos

    http://i256.photobucket.com/albums/h...185658.jpgthis one stock


    this one 45 spur ,31 pin, mini lst2 zombi max wheels and adapters .build thru ebay
    Last edited by carraig042; 02-10-2010 at 11:32 PM.

  38. #158
    RC Qualifier
    Join Date
    Nov 2009
    Location
    Quebec, Canada
    Posts
    587
    My slash body that i trimmed too much:

    Merv on LiPo 2s and 3s !!!

  39. #159
    RC Turnbuckle Jr. Cameron's Avatar
    Join Date
    May 2009
    Location
    Edmonton, Alberta
    Posts
    3,604
    Freshly installed GPM shocks/toes/pushrods


    Looking sezzy
    (RAH) (AH) + [ROMA (1+MA)] + (GA) + (OOH)(LA)

  40. #160
    RC Enthusiast
    Join Date
    Dec 2009
    Location
    Germany
    Posts
    21
    The last few Days I had the chance to take out my little E-Revo and have lots of fun with the last snow here in germany.


    http://www.youtube.com/watch?v=pLLD0FBHrr0

    P.S.: You can watch the first part on my Youtube channel.

Page 4 of 18 FirstFirst ... 2345614 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •