So, let me get this straight. There will be a 1/16th brushless ERevo and Slash, and ONLY the Slash will be brushed as well?
I went to the Amsoil site and typed in "Traxxas" and got lots of stuff!
There is also this site: http://www.racetraxxas.com/default.html
Here are the specs for the Slash brushed. $200 with free hat.
Length 14 inches (356mm)
Front Track 7.3 inches (185mm)
Rear Track 7.3 inches (185mm)
Weight 35oz (1000g)
Height (overall) 4.92 inches (125mm)
Wheelbase 8.1 inches (206mm)
Front Shock Length 48mm
Rear Shock Length 48mm
Front Tires (pre-glued) Slash All-Terrain 1.6"
Rear Tires (pre-glued) Slash All-Terrain 1.6"
Front Wheels Dual-bead 35/47mm, 12mm hex hub
Rear Wheels Dual-bead 35/47mm, 12mm hex hub
Electronic Speed Control Waterproof XL-2.5 ESC
Transmission Brushless Ready with Steel Idler Gear
Gear Ratio (internal) 5.04:1
Overall Drive Ratio 20.56 (stock, out-of-box)
Differential Type Sealed Hardened Steel Bevel
Gear Pitch 48-Pitch
Chassis Structure/Material Molded Composite Nylon Monocoque
Brake Type Electronic
Drive System Shaft-Driven 4WD
Radio System Traxxas TQ (2-Channel)
Skill Level 1
Required Batteries & Charger 8 "AA" (transmitter)
Two NiCad or NiMH (stick)
7.2V or 8.4V Charger (6 or 7 cell)
XL-2.5 WATERPROOF SPEED CONTROL SPECIFICATIONS
Input voltage: 6-12 cells (7.2 to 14.4volts DC)
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 33 grams
Motor Limit (380 size): 10-Turns**
On-Resistance (@Trans): 0.008 Ohms
Reverse Delay: None
BEC Voltage: 6.0V DC
Power Wire: 16 Gauge / 40mm
Input Harness Wire: 26 Gauge / 130mm
Motor Wires: 16 Gauge / 40mm
Transistor Type: MOSFET
PWM Frequency: 2300 Hz
Thermal Protection: Thermal shutdown
100% FWD, 100% brakes, 100% REV
100% FWD, 100% brakes, no REV
50% FWD, 100% brakes, 50% REV
Single-button setup: Yes, Traxxas EZ-Set®
Here is a great picture!
I might buy this and get the parts to make it a ERevo to have both.