TQ 2.4GHz - 2 to 4 Channel Mod

[scansbar]

Thank you VERY much!!

[riff_raff]

Hi mate just wondering if you dont have a spare traxxas controlller where can i get teh switches for the circut board?

[danielhr77]

I don't have spare ones, but get a Traxxas AM radio from eBay, they should be prety cheap by now...

Daniel

[quagman9000]

would this work for the TQi? does it enable something extra on the TQ because I am trying to work out four wheel steering and jolynsbass tried replacing a switch with a potentiometer but it didn't work(I am thinking that this modification enables something extra because zacflyer on youtube did this modification and used a potentiometer and it worked but we are still unaware of if he replaced a switch or did something else.) check out my thread. there is a link to the video.

here is the link http://traxxas.com/forums/showthread...52#post5204752

[quagman9000]

Wow, I am impressed! I thought converting the 3rd channel on my TQ3 to be fully proportional was good

I have been trying to find someone who has made fully proportional servo control on a separate channel for quite a while and I would really like to know how you can do it and if it is possible to do it to a TQi (2 or 4 channel)

this is my thread http://traxxas.com/forums/showthread...rating-a-servo

[oscar rc project]

hi guys im wondering if enny one has been able to make a 2ch in to a 5ch if so can they send me a diagram on how to or some pictures.thankyou

[Jimmie Neutron]

Everything is here...
The 4th and 5th channels are only half channels and dependent of each other. There is no way to separate them.

[danielhr77]

Oscar, got your message, please, read the 5 pages of this thread, everything you need is here...