my ammmazing summit

[streetsports]

k well here it is...all rpm hubs, rpm front arms, j concepts wing, mmm/2200kv neu combo (i push it with 2 5k mah 7 cells when bashing and a single 6600 mah 2s 35c lipo when crawling) and im using 1 metal cvd up front (ive broken 2 metal ones and a plastic one all while crawling locked in low on 1 lipo), yellow and orange springs, terra pins from my xl for track and the stockers for everything else, onyx 240 dual charger for the nmh's and a dynamite lipo charger with a blinky...im running 14/58 (i have a 54 i havnt tried yet) i was running 19/66 which was also nice...p.s. the aluminum pinion that comes with the mamba heats and and wears down even against the nylon

http://i294.photobucket.com/albums/m...s/100_1018.jpg

http://i294.photobucket.com/albums/m...s/100_1019.jpg

http://i294.photobucket.com/albums/m...s/100_1020.jpg

http://i294.photobucket.com/albums/m...s/100_1021.jpg

http://i294.photobucket.com/albums/m...s/100_1023.jpg

http://i294.photobucket.com/albums/m...s/100_1025.jpg

http://i294.photobucket.com/albums/m...s/100_1026.jpg

http://i294.photobucket.com/albums/m...s/100_1045.jpg

and heres what i have right now until i go get the new internal diff gears that were shredded
http://i294.photobucket.com/albums/m...s/100_1044.jpg





Please keep all images to a maximum width of around 600 pixels. To do this, you may need to edit the image using an image editor before you upload the picture to your host.

I have changed the images to links so that people don't have to scroll to read the thread.

Mis'

[davidrx794]

cool so what top speed do you think your seeing?

[traxxasfan1]

yeah i would like to the top speed with those 7 cells???

[streetsports]

its pushin me about as fast as my 3.3 rustler....wheelies on demand....im kinda scared to even try 6s...

its fast enough that a wing made a huge diference in handling

[ricketkm]

nice truck i like the set up i send you a pm

[streetsports]

pm back at ya....and tank you...as soon as shes fixxed i'll get video

[ricketkm]

what radio r u using?

[streetsports]

stock until i get the 4pk....also this thing ends up on its lid from too much power pretty often...ive already shaved right through the wire and had to re-solder it...now i tuck it under the exo cage

[akrimmel]

hey streetsports can you answer this question for me.

http://monster.traxxas.com/showthread.php?t=459541

[streetsports]

i had to cut that portion out...but trust me its still plenty strong because that bar is right where it mounts anyway...ive put it to the test....i suppose you could always heat and bend it out of the way....but beware, if you heat it too much it will make it brittle

rpm makes there parts waaay too strong so dont be afraid to mod there products a bit....but dont expect the warranty to hold up

[akrimmel]

i was going to wait to cut it until the right side came, but i will do it ahead of time,,thanks for the response.

[Bohh]

Do you think 4s lipo would work on this setup. Considering that myself.

[akrimmel]

wouldn't reccomend it wit h the evx2!

[Bohh]

No, on a MMM

[streetsports]

yes i think so....i think it would take 6s with the punch control way up

i mean its trani and diffs come from the same brushless ready trucks that people have been putting these motors on for a log time...even more powerfull motors...a hacker on 8s would be sick but 1st traxxas needs to engineer a performance chassis (maybe even a revo style 3d aluminum style) with battery compartments twice as deep as they are now