Page 3 of 4 FirstFirst 1234 LastLast
Results 81 to 120 of 133
  1. #81
    RC Racer
    Join Date
    Feb 2011
    Location
    Decatur Texas
    Posts
    216
    You can get with dis or you can get with dat

  2. #82
    RC Racer
    Join Date
    Feb 2011
    Location
    Decatur Texas
    Posts
    216

    Our Babies
    You can get with dis or you can get with dat

  3. #83
    RC Enthusiast
    Join Date
    Apr 2011
    Posts
    40
    Here's my Slayer Pro. Mods are so far:

    Traxxas center diff kit
    Traxxas GTR blue anodized shocks
    40WT/40WT w/ swapped springs
    Ofna fuel filter
    MIP temperature gauge
    Relocated air filter to higher off ground

    To be installed:
    Traxxas Swaybar kit
    Traxxas 17mm hub kit
    Proline KMC wheels and tires

    In the future:
    Picco .21 swap
    Stainless driveshafts and CV's


  4. #84
    RC Competitor
    Join Date
    Mar 2011
    Posts
    66
    I got a used and abused original Slayer for cheap. I then converted it to a Slayer Pro purchasing the parts on eBay! Painted up a Desert Rat body, and here is the finished product!


    By mrblargman at 2011-02-20


    By mrblargman at 2011-02-20


    By mrblargman at 2011-02-20


    By mrblargman at 2011-02-20

    This thing is a blast! I love it! Everyone enjoy!

  5. #85
    RC Competitor
    Join Date
    Dec 2010
    Posts
    81

    My Slayer with Aka Pro5 Cityblocks and other hop-ups!

    For people looking for tires these are great performing and looking but need 17 mm hubs. The body is a Chevy Silverado 2011.

  6. #86
    RC Enthusiast
    Join Date
    Apr 2011
    Posts
    40
    [IMG][/IMG]

    Traxxas 17mm adapters installed, KMC Wheels installed, 30 wt installed in shocks, put traxas 3.1's in rear

    Stainless steel driveshafts and P2 rockers on the way

  7. #87
    RC Enthusiast
    Join Date
    Jul 2009
    Posts
    33
    My new 2011 monster (old slayer) and some other bodys I did for slash 4x4s:








  8. #88
    RC Racer
    Join Date
    Jun 2011
    Location
    Spring, TX
    Posts
    117


    Here's mine. Can anyone spot what's different? In addition to the mystery mod are:
    Futaba 4PKS
    2075 throttle servo (both servos being replaced with Savox Monday)
    Buku clutch, which is absolutely incredible and definitely worth the very fair price
    P3 rockers to slightly lower the ride height
    Sway bars
    Variable rate shock pistons and 40/50 weight oil front and rear
    4Wheel Parts body, in the process of being replaced by an airbrushed clear body
    Fuel filter
    Slash 4x4
    Slayer Pro
    Nitro 4-Tec 3.3

  9. #89
    RC Racer
    Join Date
    Jun 2011
    Location
    Spring, TX
    Posts
    117
    Here's another pic, topless again, with something new thrown in for fun...

    Slash 4x4
    Slayer Pro
    Nitro 4-Tec 3.3

  10. #90
    RC Racer
    Join Date
    Jun 2011
    Location
    Spring, TX
    Posts
    117
    Actually got around to taking a pic with the body on:



    And just to show off the blingy body mounts:

    Slash 4x4
    Slayer Pro
    Nitro 4-Tec 3.3

  11. #91
    RC poster
    Join Date
    Sep 2011
    Posts
    3
    New to the Slayer but so far I love it



  12. #92
    RC Competitor
    Join Date
    Apr 2011
    Posts
    82
    Here's my pros



    Bought the black one new, red one used in almost new condition.

  13. #93
    RC Enthusiast
    Join Date
    Apr 2007
    Location
    SO Cal O.C.
    Posts
    46
    I just received a used one in the mail...


    A dusty used one. I think they drove it into the box then wrapped it.
    Signing off from
    Left of Area 51.

  14. #94
    RC Turnbuckle Jr. 08kgraves's Avatar
    Join Date
    Apr 2011
    Location
    castalia ohio
    Posts
    5,297
    some winter fun





    and a winter crash into the ditch

    there's no life like a LOW LIFE!
    Drag It!

  15. #95
    RC Qualifier
    Join Date
    Jul 2010
    Location
    astoria
    Posts
    354
    heres my slayer pro 4x4 with sway bars.






    i ripped off the back off the bug thats why it looks like something is missing.. thats what happens when you run it without the rear bumper.. but it looked cool.

    and for fun
    custom summit crawler parts lol

  16. #96
    RC Enthusiast
    Join Date
    Apr 2007
    Location
    SO Cal O.C.
    Posts
    46
    I just bought another Slayer roller. Attempted to install the Big Block kit. Couldn't clear the rear suspension arm.




    Finally setted with a Sirio .23 and Escalade body

    Signing off from
    Left of Area 51.

  17. #97
    RC poster
    Join Date
    Feb 2012
    Posts
    13
    Here is my Slayer Pro all the way from Malaysia...i'm new to the Slayer Pro ( new to Traxxas to be precise ). Planning to put the 17mm hex and buggy tires in future due to my local buggy / MT track is not quite friendly for Short Course Truck


  18. #98
    RC Enthusiast
    Join Date
    Jan 2012
    Posts
    21

    Slayer








  19. #99
    RC poster
    Join Date
    Feb 2012
    Posts
    1
    Heres my Slayer Pro:

    Traxxas Sway Bar Kit
    Pro-Line Trencher Tires
    Pro-Line Epic Wheels




  20. #100
    RC Competitor
    Join Date
    Mar 2012
    Location
    California
    Posts
    93
    Just a basic Slayer Pro, Sway Bar Kit, waiting on 17mm hubs and buggy wheels/tires... Got bored with an old 2.5 and fixed it up and threw it in!

  21. #101
    RC Turnbuckle Jr. Wolfslash16's Avatar
    Join Date
    Mar 2012
    Location
    Riverton Utah
    Posts
    4,352
    This is my slayer. It's all stock except for the sway bar kit. But I love it and enjoy driving it! (For those of you who have a good eye, yes, the engine is missing in these pictures. I'm currently fixing a clutch bell issue)
    Last edited by Wolfslash16; 05-04-2012 at 07:18 PM.
    Sl2sh Slayer Summit Sl4sh Teton/Rally T-Maxx Pnde

  22. #102
    RC Turnbuckle Jr. Wolfslash16's Avatar
    Join Date
    Mar 2012
    Location
    Riverton Utah
    Posts
    4,352
    I figured I post some "updated" pics of my slayer.
    Sl2sh Slayer Summit Sl4sh Teton/Rally T-Maxx Pnde

  23. #103
    RC Racer
    Join Date
    Aug 2012
    Location
    Levittown, NY
    Posts
    141




    [IMG][/IMG]

  24. #104
    RC Competitor
    Join Date
    Jun 2012
    Location
    Georgia
    Posts
    83
    My new/used Slayer!!
    "Haters gonna hate, bashers gonna bash!!"

  25. #105
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Edmonton, AB Canada
    Posts
    480


    9.photobucket.com/albums/jj584/nitrorc40/IMGA0092.jpg[/IMG]


  26. #106
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Edmonton, AB Canada
    Posts
    480


  27. #107
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Edmonton, AB Canada
    Posts
    480
    Big Block slayer pro .28 picco

    new era mount custom linkage



  28. #108
    RC Qualifier
    Join Date
    Mar 2012
    Location
    Edmonton, AB Canada
    Posts
    480
    Custom Monster body SlayerPro .28 picco big block



  29. #109
    RC Competitor
    Join Date
    Sep 2011
    Location
    Tucson, AZ
    Posts
    69

    Slayer and Slayer Pro

    Here is a pic of my Slayer Pro and the Slayer I got off eBay. The Pro is stock, except for the pro line beadloc wheels and tires. The slayer came with carbon fiber chassis, tuned pipe, swaybar kit and extra wheels/tires. In fact it came almost ready to run, all I needed to add was a rx/tx and easy start system.


    009 by riverbluff4, on Flickr

  30. #110
    RC Enthusiast
    Join Date
    Nov 2011
    Posts
    36
    Slayer Pro Vids: https://www.youtube.com/watch?v=mTTPXTWciTo

    Here's some pic with my new Revo 3.3 Platinum body I bought for my Slayer Pro 4x4, with new
    ProLine BadLands!!

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

  31. #111
    RC Champion
    Join Date
    Mar 2011
    Location
    Usquam sed hic
    Posts
    1,568
    Matthew 7:7

  32. #112
    RC Turnbuckle Jr. Cameron's Avatar
    Join Date
    May 2009
    Location
    Edmonton, Alberta
    Posts
    3,603
    Here is my E-SlayerPro4x4 Castle Mamba 2200kv
    Built on the ERBE Chassis. Will get a black chassis the next time i feel like doing some dye work.

    SC8e Shell
    (RAH) (AH) + [ROMA (1+MA)] + (GA) + (OOH)(LA)

  33. #113
    RC poster
    Join Date
    Jan 2013
    Posts
    2



    Here's the new slayer, upgrades to happen very soon.

  34. #114
    RC Enthusiast
    Join Date
    Dec 2012
    Posts
    20
    Here's our slayer pro stock bashing and hitting big jumps. This thing is a beast straight out of the box, wasn't sure how much bashing it could handle but nothing broke and this video doesnt show even half of the "unclean" bashing
    along side are a couple of savages and a jato

    http://www.youtube.com/watch?v=RF3Sj...RApEDg&index=1

  35. #115
    RC poster
    Join Date
    Jan 2012
    Posts
    15


    Last edited by driftindaddy; 02-18-2013 at 09:22 PM. Reason: I put in wrong link

  36. #116
    RC Enthusiast
    Join Date
    Mar 2011
    Location
    KCMO
    Posts
    36







  37. #117
    RC poster
    Join Date
    Feb 2013
    Posts
    4
    my flo-tek body




  38. #118
    RC poster
    Join Date
    Sep 2011
    Posts
    8
    [IMG][/IMG] stock tires and rims [IMG][/IMG] new tires and rims

  39. #119
    RC Racer
    Join Date
    Jun 2011
    Location
    Spring, TX
    Posts
    117
    Painted a body the other day. I need a smaller needle and nozzle for the airbrush. This one has trouble with the fine lines in lightning.

    Slash 4x4
    Slayer Pro
    Nitro 4-Tec 3.3

  40. #120
    RC Competitor
    Join Date
    Aug 2012
    Location
    Middle River,MD
    Posts
    84
    Jato 3.3,Slayer pro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •