I need as many opinions as possible. What batteries would you recommend with the new HV 6.5 ??? Thanks so much
I need as many opinions as possible. What batteries would you recommend with the new HV 6.5 ??? Thanks so much
i have the same motor and i was wondering the same thing. please help!!!
Nirto Rustler- For Sale
T-maxx 3.3 4909- For Sale
Either spc 8000mah 2s lipos or http://cgi.ebay.com/7-4V-12C-8000mAh...QQcmdZViewItem I have used both flawlessly .
_
_
_ 3 lines are all that's allowed in a sig.
awesome I was wondering that to as have 6.5 on the way and have spc batteries on the way to so it looks like they will be happy together.
Another option as you stated you need would be the Maxamps 2s 8000mah packs. I run them and love them.
http://www.maxamps.com/proddetail.ph...O-Pair&cat=172
Great performance with awesome run times! MA's customer service is beyond reproach as well.![]()
there is also the truerc 15c 2s 8000's.
be nice.
I see on the site they say the battery boxes need some modding to get them to fit. What modding needs to be done to get these to fit? Just curious. ThanksOriginally Posted by HoovHartid
take off the black plastic hold down pieces in the battery box
I didnt do anyhing but take out the plastic spring clip from the top
![]()
be nice.
Cool thanks!
Originally Posted by ERevoaddict
no prob![]()
be nice.
Hoov how do the batteries handle the amp draw? You are running a Neu 1y right?
I think he's waiting on a new MMM.Originally Posted by ERevoaddict
I run the HV 6.5 system with a pair of Maxamps 2s 6000mah packs and love it.
Traxxas racing!
Go the HV 6.5..seems to get bagged here![]()
yup, yet to find outOriginally Posted by ah-see
![]()
be nice.
Originally Posted by HoovHartid
Haha, Hoov I think we're in the same boat:
Went to upgrade speant $$$$ and then don't have a MMM to run it all, so we can't test anything...HA....
![]()
E-R-E-V-O : My anti-drug.
The SMC 2s 5000 28c packs are sweet iMO.. I love my maxamps 2s2p 8k packs as well... they are also outstanding. I raced w/ the smc's for the first time tonight and I like the way my truck feels w/ the reduced weight for sure. I could have easily finished a 20min main (ours was less tonight). You will need to go w/ the 8k packs though for a 30min main, it's the only thing making it the whole way. Of course bashing you'll get more time out of both packs.
Neu 1515 2.5d & 1.5d, 2x MMM -sIck IaM
will these fit the e-revo and be ok with medusa 36-60-2000?
and will they be sufficient for a twin velinion setup in converted revo
http://www.spcracing.com/index.php?productID=60
MMM is giving new meaning to "Make Em Cry
Originally Posted by BUSTITUP
I wouldn't get anything that can't do at least 120amps
mAH * C rating = amps
those SPC 12c 5k packs are good for 60amps at best 80amps if they are under rated.
You should be ok w/ the 8k 12c packs or the true rc 8k 15c packs or the maxamps 8k 20c packs or the SMC 28c 5k pack..
Neu 1515 2.5d & 1.5d, 2x MMM -sIck IaM
Originally Posted by ERevoaddict
Am I reading that right, 3 Benjis for 1 battery. I'm by no means cheap, but holy crap.![]()
thats for the pair, still a rip for what you get from them
OKay that seems a little more reasonable.Originally Posted by jayjay283
Enerland Racing Professional "XQ" Series Li-Poly Battery Pack 30C (7.4V - 5000mAh) look good with 150 amp maximum continuous discharge. http://www.amainhobbies.com/product_...ducts_id/27139
Just not certain how well it'd fit with those wires???
I approve of this message
there was discussion about this awhile back. These packs use a "banana" style plug for the connectors to plug into the pack. There was concern that they would stick up too much to fit in the erevo compartments. I suggested using connectors like these;Originally Posted by marksp
then bending the wire like this before soldering it to the plug to make the as close to 90 degrees as possible;
I think someone did it, and it worked fine but I cant find the thread now...![]()
be nice.
If you using a mamba monster & a Neu motor you need a battery that can supply the power.Below is a quote from castle creations from another forum
The official stand of Castle is that any pack that can handle 75A continuous, and 150A peak is sufficient for use with the MMM.
Originally Posted by HoovHartid
cant believe that fit in there....
Argh, I had a really good joke lined up too, but Im on 88% warning....
READ THE FAQ!
or else.....
Im at 78% warning from this forum and I dont even own an erevo. I feel my constructive criticism has been misconstrued.![]()
Was it something like. Yeah thats what she said.Argh, I had a really good joke lined up too, but Im on 88% warning....cant believe that fit in there....
_
_
_ 3 lines are all that's allowed in a sig.
Yep, pretty much!![]()
READ THE FAQ!
or else.....
Originally Posted by JOCKS_RETURN
Are you kidding? She was beggin for more!...
....So I gave it to her!
nope, still dont have my MMM.Can you tell I'm bored?
![]()
be nice.
I like where your going with that.Duct tape why didn't I think of that![]()
_
_
_ 3 lines are all that's allowed in a sig.
Hmm, looks like a good way to build a 20s lipo setup, or dual motors with 10s escs perhaps?...![]()
READ THE FAQ!
or else.....
I should post this in the "crazy set-up ideas" thread
*I dedicate this one to GeoGenesis*
maybe he can run it![]()
Last edited by HoovHartid; 08-06-2008 at 09:56 PM.
be nice.