Wierd steering issue!!!

[Maxbomb]

i recently bought a new steering servo. Its a Hi-tech HS-645MG if it matters. Anyways iv installed it and when i first turned it on it steered straight to the left. Even worse its steering in that direction so hard that its making indentations in my main steering mount thing(the big thing that connects it all together...zig zag shape ting). So yeah i adjusted my steering trim on the remote but that only hold it back a little and it steers to the right only just. The box has come with all these like circle things with screws and stuff..that might be for airplanes or somthing. So yeah ive put the right transfer kit on and everything i dont know what else to do.The wierd thijng is the old stock servo only steered to the right but had no reciever going to the left. Its just like the oppisite same thing but it recieves both sides but alot more to the left. PLEASE HELP!!!!!

Edited for language.

[jaketone]

Even worse its steering in that direction so hard that its making indentations in my main steering mount thing(the big thing that connects it all together...zig zag shape ting).

zig zag shape thing = Steering Bellcrank.

I've seen this before -- dont know what the solution was, but I'm curious to hear what others suggest.

[trx33]

Take the horn off of the servo and install it with the radio on and the servo centered on the transmitter. You probably installed it in the wrong position on the splines and your center position is way off.

Here you go.
Servo Centering

[Maxbomb]

tanxs man im all good now!!