Anyone notice??

[SNEFF]

Just got my Erevo yesterday and started installing sway bars and swept back arms. I removed my rear tires only to find out the 14mm hex's are now metal instead of plastic. Maybe this is old news but I was really surprised at this. Good job Traxxas!!

[strangersinspac]

Yeah, I first noticed this with the 3905 E-Maxx....

[ajb1205]

So the front sways clear the one motor? I was hoping they would as I have a set already to go as well as the extended rear a-arms, too. You have any pics?

[SNEFF]

Yes the front sways clear the motor. So far everything mounts up with no problem. I'll try to post a pic later today

[Dragonfueled]

my front sway bar was kinda close to the trans. I shortened the links and it works but you get full adjustment cause if you put the links to far down on the bar it will hit the trans if the suspension is fully compressed

[SNEFF]

i set up the sway bar the way the instructions said and it doesnt hit anything. I also looked at my platinum to makee sure the bar was in correctly. If yours is hitting the trans check to see the bar is in the right direction.

[Dragonfueled]

It only touched if you bottomed out the suspension. And if the collars on the links were down to far. Its really close on the right side looking at the front of the truck. The e revo trans is allot farther up then the 3.3 revo. Ill double check it later but I think its on rite. maybe ill post a pic