Page 9 of 18 FirstFirst ... 7891011 ... LastLast
Results 321 to 360 of 705
  1. #321
    RC Enthusiast
    Join Date
    Feb 2011
    Location
    wayne county, michigan
    Posts
    35
    https://picasaweb.google.com/Michael...17586204179298

    This is an HPI nitro MX-1 truck body #7161

  2. #322
    RC Champion
    Join Date
    Jul 2010
    Location
    Mt. Airy, North Carolina
    Posts
    1,046




  3. #323
    RC Champion
    Join Date
    Aug 2010
    Location
    new hampshire
    Posts
    1,768
    http://www2.snapfish.com/snapfish/sl...021_938464021/
    Mine and my daughter pedes Mine xl-5 with VXlsystem protrac arms, imex clawz,Intregy piggyback shocks, TRX aluminum c blocks,steering block and rear carriers with bearings.Daughters mostly stock xl- 5 Slash front bumper,wheeeliebar,STRC aluminum c blocks,steering blocks and rear carriers all with bearings and traxxas camber and steering links.
    Last edited by snowfighter; 03-17-2011 at 10:10 PM.

  4. #324
    RC Champion
    Join Date
    Jul 2010
    Location
    Mt. Airy, North Carolina
    Posts
    1,046
    yeeeeey haaaaaaa






  5. #325
    RC Champion
    Join Date
    Aug 2010
    Location
    Inver Grove Heights, MN
    Posts
    1,541
    Was looking through the pics and mine turned into a blue ? mark... so here is my baby again
    So I taped my hamster to the Pede..

  6. #326
    RC Racer
    Join Date
    Feb 2011
    Location
    Ocala, FL
    Posts
    120
    Here's mine with a Pede 4x4 body. I ordered it to replace the original one and the wrong one was sent but I don't care. It's mostly stock except for the Integy Shocks, Proline wheels and tires, wheelie bar wheels and the ESC fan to go with my 3S Lipo. Oh, and I have an Integy front body mount and HiTec servo which added just a little weight to the front which I was wanting. I have the Protrac kit coming for it and I'll probably put Masher tires on it then.

  7. #327
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    My VXL Grave Digger. Nothing special:
    RPM Arms
    TRX Caster Blocks/Carriers
    TRX blue wheely bar wheels
    MIP shafts
    3s 5000mah 50C
    LEDs from RC Lighthouse


    Last edited by QYKSLVR; 03-30-2011 at 02:20 AM.

  8. #328
    RC Turnbuckle Jr. AbSoLooT1's Avatar
    Join Date
    Feb 2011
    Location
    SLC, Utah
    Posts
    3,432
    Had posted mine up, But here it is completely done. Low and wide now...




















  9. #329
    RC poster
    Join Date
    Apr 2011
    Posts
    1
    This is how I roll

  10. #330
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    My how things change:
    Full blue RPM: F/R Arms, gear cover, motor mount/wheelie bar mount
    Aluminum turnbuckles/Links(not installed)
    Time to get rid of the stock shocks. bent a 2 shafts =/ you can see here

    with my 4x4:

  11. #331
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    Keep it goin!

  12. #332
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676

  13. #333
    RC poster
    Join Date
    Apr 2011
    Posts
    5
    My $20 xl-1 pede


  14. #334
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    My 2wd right now =( broke a shock tower:

  15. #335
    RC Enthusiast
    Join Date
    Mar 2011
    Location
    Afghanistan
    Posts
    47
    New body


  16. #336

  17. #337
    RC Competitor
    Join Date
    Dec 2010
    Posts
    60

  18. #338
    RC Turnbuckle Jr. BaldyDaniels's Avatar
    Join Date
    Feb 2011
    Location
    Rouleau, aka "Dog River", Saskatchewan, Canada
    Posts
    3,259
    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

    [IMG][/IMG]

  19. #339
    RC Qualifier
    Join Date
    Apr 2011
    Location
    Northern Illinois
    Posts
    292
    Everyone asks my why.... I say because I can!

    Uploaded with ImageShack.us



    Uploaded with ImageShack.us

  20. #340
    RC Qualifier
    Join Date
    Apr 2011
    Location
    Northern Illinois
    Posts
    292


    Uploaded with ImageShack.us



    Uploaded with ImageShack.us

  21. #341
    RC Enthusiast
    Join Date
    Apr 2011
    Posts
    21
    Stampede vxl - body lowered


  22. #342
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    Im diggin that hummer Baldy.

    Everything overpowered...

  23. #343
    RC Champion
    Join Date
    Jun 2003
    Location
    We-Go, Chicago, IL
    Posts
    2,675
    Just mounted up a fresh body on my old Pede today after doing a few 3s pass related repairs were finished




    I don't know why, but there seems to be a little Countach in the profile views of this body



    I'm hoping this low down nose will be good for more 3s passes

    Verses the Crowd Pleazer 2
    Aw, Biscuits!

  24. #344
    RC Qualifier
    Join Date
    Apr 2011
    Location
    Northern Illinois
    Posts
    292
    Custom Wired Headlights and taillights! Thank You Radio Shack!




  25. #345
    RC Qualifier
    Join Date
    Apr 2011
    Location
    Northern Illinois
    Posts
    292
    Runs off of a 9v power source. Rears came as assemblies w/ resistors. The fronts are 5mm High brightness whites inside mounting assemblies with added 180ohm resistors. Switch mounted behind rear window. Got a little messy with the hot glue, but not bad I think for a first time slodering and working w/ Led's.

  26. #346
    RC Turnbuckle Jr. DiggerPede's Avatar
    Join Date
    Apr 2011
    Location
    Texas, Chemical Plant along the Gulf Coast
    Posts
    7,168

    Post Digger VXL & Pede....

    Our Bashers....



    Mine...Digger BL VXL



    ProTrac, Masher 2000, & Red LEDs



    Hers....Pede XL-5



    Brushed Titan still running strong....

    Weak Revenge
    Strong Forgive
    Intelligent Ignore

  27. #347
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    I have a twin! kinda. lol

    Everything overpowered...

  28. #348
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    No fun =(

    Everything overpowered...

  29. #349
    RC Competitor
    Join Date
    Mar 2011
    Location
    Lockport NY
    Posts
    85
    My Slampede
    Side by side with stock Stampede








    ...Traxxas sLampede
    Nitro eaterrr
    3rd line

  30. #350
    RC poster
    Join Date
    Apr 2011
    Location
    Michigan
    Posts
    15



    Last edited by jornaldo; 05-07-2011 at 03:55 PM.
    It was suppost to be for my son.

  31. #351
    RC Racer
    Join Date
    Jan 2011
    Location
    Connecticut
    Posts
    135
    [IMG][/IMG]
    2x4 CC 3800 Pede
    4x4 CC 3800 Pede
    Rustler VXL

  32. #352
    RC Enthusiast
    Join Date
    Jul 2010
    Location
    NC
    Posts
    22
    Here's Mine


    It has a sidewinder sct,vxl camber links all around,lowered body,and rpm caster blocks.
    The last picture is old so it doesnt have the camber links or sidewinder
    Mopar or no Car

  33. #353
    RC Competitor
    Join Date
    May 2011
    Location
    Missoula, Montana
    Posts
    51

    Stock Stampede...my new baby.



    My bone stock Stampede my uncle just sent me posing in front of my 32" R/C Ski Boat. Hope it's okay to post her up with her trailer queen...(trailer not built yet)...Looking forward to upgrading this one a bit before I purchase a VXL for myself and prolly a slash for my wife.

  34. #354
    RC Turnbuckle Jr. DiggerPede's Avatar
    Join Date
    Apr 2011
    Location
    Texas, Chemical Plant along the Gulf Coast
    Posts
    7,168
    Figured i'd post an updated pic of my upgrades. The Digger body is starting to get a little ragged cuz of all the bashing (looks like it's been through freestyle). =D



    Weak Revenge
    Strong Forgive
    Intelligent Ignore

  35. #355
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    Cant wait for my roller to get here Tuesday! =)

    Everything overpowered...

  36. #356
    RC Competitor
    Join Date
    May 2011
    Posts
    75
    Got this for Christmas, its been beat up pretty good. Put the lights in a few months ago, they plug into the esc and have taken alot of abuse. Just installed a protract kit, big bore shocks and trencher's. Ordered all my aluminum and a VW body but they havn't come in yet.



    Last edited by sdelam; 05-22-2011 at 08:25 PM. Reason: For some reason, My photos got croped.

  37. #357
    RC Competitor
    Join Date
    May 2011
    Posts
    75
    Could not wait for the VW body to come in so... I picked up a new VXL body from the LHS. It has VXL stickers and paint but the body is different and it has a hole like a XL-5. The stickers didnt fit right so I had to make them work. I think the color turned out great though.




  38. #358
    RC Champion
    Join Date
    Mar 2011
    Location
    The Mitten
    Posts
    1,676
    Color looks great! Just finished my digger VXL build:

    Everything overpowered...

  39. #359
    RC Turnbuckle Jr. BaldyDaniels's Avatar
    Join Date
    Feb 2011
    Location
    Rouleau, aka "Dog River", Saskatchewan, Canada
    Posts
    3,259
    Body is a Parma 3 piece 57 chevy bel air with custom paint.





    Never trust an "Atom", they make up everything.

  40. #360
    RC Competitor
    Join Date
    Jun 2011
    Location
    illinois
    Posts
    87
    Last edited by spede13; 06-15-2011 at 02:04 PM.

Page 9 of 18 FirstFirst ... 7891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •